Best In Class Gasoline Engines
Our line of Direct-Drive positive pressure ventilation fans use only the best small engines the industry has to offer. All 16″ to 24″ PPV fans come available with your choice of either a Honda GX Series or Briggs and Stratton OHV engine. Both engine makes are known for their remarkable performance and unchallenged reliability. There’s no wrong choice between these two.
- Gas blower with your choice of Honda GX or Briggs & Stratton OHV engine
- Offers an ideal combination of value, performance and durability
- Features an overhead valve engine that delivers reliability and performance
- Compact design for tight compartment spaces
- Faster setup with no power cord lays or generators to crank
- For additional Product Information, see below:
Gasoline Engines – PPA
Gasoline powered positive pressure ventilation fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.4 HP, these units are recommended for the implementation of Positive Pressure Attack (PPA) in residential structures.
Welded Steel Roll Cage Frame
Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor.
8” Non–Pneumatic Wheels
Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The blower rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of blower while in operation is eliminated. Risk of getting clothing in blower blades while kneeling to set brake levers is eliminated. 16” positive pressure ventilation fans are available only with 6” non-pneumatic tires.
Turbo 2000 Shroud
By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind.
AirFlex Composition Impeller
Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury.
The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions.
Dual “Winning Step”
No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°.
Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards.
Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use.
||Positive Pressure Ventilation Fan, Cone Air Flow (CAF)
| 16″ Models: Honda GX160 or Briggs & Stratton OHV 550
18″ Models: Honda GX160 or Briggs & Stratton OHV 950
21″ Models: Honda GX200 or Briggs & Stratton OHV 950
24″ Models: Honda GX200 or Briggs & Stratton OHV 950
||16″, 18″, 21″ or 24″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades
||Turbo 2000 Design, Tapered Aluminum w/ Durable Powder-Coat Finish
||16″ Models: 6″ Non-Pneumatic w/ Steel Hubs
18″, 21″ and 24″ Models: 8″ Non-Pneumatic w/ Steel Hubs
||Continuous Circular-Wound, External-Weld Steel Wire with 8 Tie Points for Additional Safety
Meets UL & European CE Safety Standards
||Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish
||Steel-Reinforced Rubber and Welded Steel Spring Feet
||Foot-Operated Tilt Mechanism
16” Models: Four Position Tilt, +10°, +5°, 0°, -5°
18”, 21”, 24” Models: Five Position Tilt, +15°, +10°, +5°, 0°, -5°