Super Vac Valor PPV Fan

$2,150.00$2,700.00

OVERVIEW
  • Full-Roll Cage Frame: Features a tough, tubular aluminum frame to protect key components; delivers a lightweight design (15% lighter than steel frames)
  • 7-Position Tilt Frame with Step Pad: Provides positive/ negative angles; allows for fan placement on stairs; allows tall firefighters to easily move fan
  • Fold-Down Ergonomic Handle: Folds down into frame for compact storage; features full-width handle for easy grip with heavy-duty gloves
  • Flat-Proof Rubber Tires: Eliminates flat tires; rolls up stairs and curbs easily; tires are placed on the back of the frame so that firefighters never have to put themselves between the PPV and the fire during setup
    Single-Piece Cast Aluminum Blade: Holds up better than plastic in high heat
  • Precision-Spun Steel Shroud: Provides durability with max airflow
  • StreamShaper Guard: Standard guard, designed for farther setback; Air Cone Guard available by request
  • AMCA Licensed Airflow: Ratings listed below are based on tests in accordance with Air Movement Control Association (AMCA publication 211) and comply with the AMCA certified ratings program

Quartz Light Kit * 

Chevron Decal * 

SKU: V18-ES, V18-EV, V18-EX, V20-ES, V20-EV, V20-EX, V18-GC, V18-GX, V20-GB, V20-GC, or V20-GX Category: Tag:

Description

V18-ES VALOR PPV FAN 18″ ELECTRIC SINGLE SPEED 

Powered by a single-speed TEAO motor, this PPV electric fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions with a mixture of residential and commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Motor: Leeson, single speed, TEAO, 1Hp, 60/50hz, 115/230V
HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm
Blade Diameter: 18″ – 457mm
Weight: 80 lbs – 36.5 kg
RPM: 1,750
Start Requirements: 4,000w – 15 amp circuit
Run Requirements: 1,500w
Set Back: 9ft – 2.7m
Angle: 13°
Output: 6,378 cfm – 10,836 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

V18-EV VALOR PPV FAN 18″ ELECTRIC VARIABLE SPEED 

Powered by a variable-speed electric motor, this PPV fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions with a mixture of residential and commercial structures and the need for maximum output on a 15-amp circuit. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC
HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm
Blade Diameter: 18″ – 457mm
Weight: 84 lbs – 38kg
RPM: 2,400
Start Requirement: 2,000w – 15 amp circuit
Run Requirement: 1,500w
Set Back: 9 ft 2.7m
Angle: 14°
Output: 10,744 cfm – 18,254 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

V18-EX VALOR PPV FAN 18″ ELECTRIC HAZARDOUS LOCATION 

Powered by an explosion-proof Class 1, Group D electric motor, this PPV fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions that encounter hazardous, explosive environments within a mixture of residential and commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Motor: Bluffton, single speed – hazardous location rated for Group 1 Class D, 1Hp, 60/50hz, 115/230V AC
HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm
Blade Diameter: – 18″ – 457mm
Weight: 90 lbs – 41 kg
RPM: 1,750
Start Requirements: 4,000w – 15 amp circuit
Run Requirements: 1,500w
Set Back: 9 ft – 2.7m
Angle: 13°
Output: 6,378 cfm – 10,836 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

V20-ES VALOR PPV FAN  20″ ELECTRIC SINGLE SPEED 

Powered by a single-speed Totally Enclosed Air Over (TEAO) motor, this slightly larger PPV electric motor fan is perfect for jurisdictions with medium to large residential structures, as well as some commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Motor: Leeson, single speed, TEAO, 1Hp, 60/50hz, 115/230V
HxWxD: 26.5″ x 25″ x 21.5″ – 675mm x 635mm x 550mm
Blade Diameter: 20″ – 508mm
Weight: 82 lbs – 37 kg
RPM: 1,750
Start Requirements: 4,000w – 15 amp circuit
Run Requirements: 1,500w
Set Back: 9 ft – 2.7m
Angle: 10°
Output: 9,007 cfm – 15,302 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

V20-EV VALOR PPV FAN 20″ ELECTRIC VARIABLE  SPEED 

Powered by a variable-speed electric motor, this PPV fan provides a slightly larger PPV — perfect for jurisdictions with medium to large residential structures, as well as some commercial buildings, that seek precise air control movement and up to 33% more airflow than single-speed motors. This PPV runs on a 15-amp circuit. Featuring a patent-pending frame design that is simple and intuitive to posMotor: Leeson with KB Controller, variable speed, 1.5 Hp, 60/50hz, 115/230V AC
HxWxD: 26.5″ x 25″ x 21.5″ – 675mm x 635mm x 550mm
Blade Diameter: 20″ – 508mm
Weight: 86 lbs – 39 kg
RPM: 2,400
Start Requirement: 2,000 w – 15-amp circuit
Run Requirement: 1,500 w
Set Back: 9 ft – 2.7m
Angle: 11°
Output: 13,788 cfm – 23,426 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6ition on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

V20-EX VALOR PPV FAN 20″ ELECTRIC HAZARDOUS LOCATION 

Powered by an explosion-proof Class 1, Group D electric motor, this PPV fan provides a slightly larger fan for departments that encounter hazardous, explosive environments with medium to large residential structures, as well as commercial buildings. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Motor: Bluffton, single speed – hazardous location rated for Group 1 Class D, 1Hp, 60/50hz, 115/230V AC
HxWxD: 26.5″ x 25″ x 21.5″ – 675mm x 635mm x 550mm
Blade Diameter: 20″ – 508mm
Weight: 92 lbs – 42 kg
RPM: 1,750
Start Requirements: 4,000w – 15 amp circuit
Run Requirements: 1,500w
Set Back: – 9 ft – 2.7m
Angle: – 10°
Output: – 9,007 cfm – 15,302 cmh
*RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

V18-GC VALOR PPV FAN 18″ GAS HONDA GC160

Powered by a Honda GC160, this PPV gas engine fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions with a mixture of residential and small commercial structures.
Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Engine: Honda GC160
HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm
Blade Diameter: 18″ – 457mm
Weight: 76 lbs – 35 kg
RPM: 3,360
Set Back: 6 ft – 1.8 m
Angle: 18°
Output: 13,223 cfm – 22,466 cmh

V18-GX VALOR PPV FAN 18″ HONDA GX200

Powered by a Honda GX200, this PPV gas engine fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions with a mixture of residential and small commercial structures.
Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Engine: Honda GX200
HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm
Blade Diameter: 18″ – 457mm
Weight: 84 lbs – 38 kg
RPM: 3,535
Set Back: 6 ft – 1.8 m
Angle: 18°
Output: 15,168 cfm – 25,770 cmh

V20-GB VALOR PPV FAN 20″ GAS BRIGGS 205CC VANGUARD 

This slightly larger PPV gas engine fan is perfect for jurisdictions with medium to large residential structures, as well as some commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Engine: Vanguard by Briggs & Stratton – 205cc
HxWxD: 26″ x 25″ x 23″ – 660mm x 640mm x 590mm
Blade Diameter: 20″ – 508mm
Weight: 79 lbs – 36 kg
RPM: 3385
Set Back: 6 ft
Angle: 18°
Output: 15,350 cfm – 26,080 cmh

V20-GC VALOR PPV FAN 20″ GAS HONDA GC160

Powered by a Honda GC160, this slightly larger PPV gas engine fan is perfect for jurisdictions with medium to large residential structures, as well as some commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Engine: Honda GC160
HxWxD: 26.5″ x 25″ x 21.5″ – 675mm x 635mm x 550mm
Blade Diameter: 20″ – 508mm
Weight: 78 lbs – 35 kg
RPM: 3,185
Set Back: 6 ft – 1.8 m
Angle: 13°
Output: 15,449 cfm – 26,248 cmh

V20-GX VALOR PPV FAN 20″ GAS HONDA GX200

Powered by a Honda GX200, this slightly larger PPV gas engine fan is perfect for jurisdictions with medium to large residential structures, as well as some commercial structures. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.

Engine: Honda GX200
HxWxD: 26.5″ x 25″ x 21.5″ – 675mm x 635mm x 550mm
Blade Diameter: 20″ – 508mm
Weight: 86 lbs – 39 kg
RPM: 3,350
Set Back: 6 ft – 1.8 m
Angle: 12°
Output: 18,182 cfm – 30,891 cmh

Additional information

Size

,

Type

,

Model

, , , , ,