mPower Electronics UNI 321 Maintenance-Free Single Gas Detectors

Key Features: Simple GO, NO GO No Maintenance needed for the life of instrument (except use under extreme conditions) Low cost of ownership UL, cUL, ATEX & IECEx intrinsic Safety Covers HAZ. LOC. Class I, ABCD; Class II, EFG; Class III, T4 Super large LCD, easy to read digits High strength shell material, drop resistance and comfort feeling Battery life 50% longer than conventional products Full Range alarm by 6 bright red flashing LEDs Up to 50 alarms events in data log H 2 S, CO or O 2 Sensor options Continuous operations in the choice of 3-2-1-year models Set low and high alarms points with Docking Box Bump test and calibrated with CaliCase Unit Includes: MP10X instruments with sensor AA size lithium battery & alligator clip Quick guide Calibration/Bump test adapter Applications : Emergency response Environmental Fire service Industrial hygiene Oil and gas Detector Specifications: Size 3.46 x 2.44 x 1.3 in (88 x 62 x 33 mm) Weight 4.4 oz (125 g) Temperature -4°F to 122°F (-20°C to 50°C) Humidity 5 to 95% relative humidity (non-condensing) Alarm Type High alarm, Low alarm, Battery low alarm Alarm Signal 90 dB @ 30 cm Bright red LED Built in vibrator Calibration Manual zero (CaliCase/MP300T1 allows 2-point calibration, zero and span) Event log Up to 50 alarm events Response time 20 seconds IP rating IP-67 EMI/RFI Compliant with EMC 2004/108/EC Safety certifications. UL/cUL Class I, Div 1, Group A, B, C, D Class II, Div 1, Group E, F, G Class III, Div 1 T4, -20°C ≤ T amb ≤ +50°C Operating life 1 year for MP101 2 years for MP102 3 years for MP103 Sensor Specifications Gas Measuring Range / Resolution (ppm) Instrument P/N Model H 2 S Hydrogen Sulfide) CO (Carbon Monoxide) O 2 (Oxgen) 100/0.1 500/1 30.0%/0.1% M014-0002-000 M014-0001-000 M014-0003-000 MP101 (1 Yrs) H 2 S Hydrogen Sulfide) CO (Carbon Monoxide) O 2 (Oxgen) 100/0.1 500/1 30.0%/0.1% M015-0002-000 M015-0001-000 M015-0003-000 MP102 (2 Yrs) H 2 S Hydrogen Sulfide) CO (Carbon Monoxide) O 2 (Oxgen) 100/0.1 500/1 30.0%/0.1% M016-0002-000 M016-0001-000 M016-0003-000 MP103 (3 Yrs)

mPower Electronics UNI MP100 Single Gas Detectors

Key Features: UL, cUL, ATEX & IIECEx intrinsic safety Covers HAZ LOC Class I, ABCD; Class II, EFG; Class III, T4 Super Large LCD, easy to read digits High strength shell material, drop resistance and comfort feeling, Solid stainless-steel alligator clip Battery life 50% longer then conventional products Full range alarm by 6 bright red flashing LEDs Smart sensors supporting offline calibration Wide range of toxic sensor options 50 event datalogging Low cost of ownership Multiple gas display units configurable Two point field calibration Span gas value configurable Unit Includes: MP100 instruments with sensor, AA size lithium battery & alligator clip Quick guide Calibration adapter Applications: Emergency response Environmental Fire service Industrial hygiene Oil and gas Detector Specifications: Size: 3.46 x 2.44 x 1.3 in (88 x 62 x 33 mm) Weight: 4.4 oz (125 g) Temperature: -4°F to 122°F (-20°C to 50°C) Humidity: 5 to 95% relative humidity (non-condensing) Alarm Type: High alarm, Low alarm, STEL alarm, TWA alarm, adjustable. Over-range alarm, Battery low alarm Alarm Signal: 90 dB @ 30 cm audible, bright red LED, built in vibrator Calibration: 2 point calibration, zero and span, power on zero (user-selectable) Event log: Up to 50 alarm events Response time (t90): 20 seconds (CO/H2S/O2), Others vary, see individual sensor specification sheet IP rating: IP-67 EMI/RFI: Compliant with EMC 2004/108/EC Safety certifications: UL/cUL; Class I, Div 1, Group A, B, C, D; Class II, Div 1, Group E, F, G; Class III, Div 1; T4, -20°C ≤ Tamb ≤ +50°C Battery: Replaceable AA size Lithium battery, 3 years typical operation Sensor: CO/H2S expected operating life 5 years or longer, others 2 years or longer Warranty: 2 or 1 year, depending on sensor type Sensor Specifications: Gas Measuring Range / Resolution (ppm) Instrument P/N CO (Carbon Monoxide 500/1 1000/1 2000/1 M001-0002-000 M001-0023-000 M001-0026-000 H 2 S (Hydrogen Sulfide) 50.0/0.1 100.0/0.1 200.0/0.1 1000/1 M001-0003-000 M001-0054-000 M001-0057-000 M001-0060-000 O 2 (Oxygen) 25.0/0.1% 30/0.1% M001-0032-000 M001-0001-000 SO 2 (Sulfur Dioxide) 20.0/0.1 100.0/0.1 M001-0007-000 M001-0091-000 Sl 2 (Chlorine) 50.0/0.1 M001-0004-000 NO (Nitric Oxide) 250/1 M001-0015-000 NO 2 (Nitrogen Dioxide) 20.0/0.1 M001-0011-000 H 2 (Hydrogen) 1000/1 2000/1 M001-0018-000 M001-0019-000 PH3 (Phosphine) 20.00/0.01 M001-0016-000 ETO Ethylene Oxide 100.0/0.1 200.0/0.1 M001-0012-000 M001-0069-000 NH3 (Ammonia) 100/1 500/1 M001-0006-000 M001-0090-000 CIO 2 (Chlorine Dioxide) 1.00/0.01 M001-0072-000 HCN (Hydrogen Cyanide) 100/1 M001-0005-000 O3 (Ozone) 1.00/0.02 M001-0009-000 HF (Hydrogen Fluoride) 10.0/0.1 M001-0014-000 HCl (Hydrogen Chloride) 15.0/0.1 M001-0008-000 CH 3 SH (Methyl Mercaptan) 10.0/0.1 M001-0077-000 THT (Tetrahydrothiophene) 50.0/0.1 M001-0085-000 C 2 H 4 O (Acetaldehyde) 20.0/0.1 M001-0080-000

Super Vac Gas Powered PPV Fan

Powered by a Briggs Vanguard, this PPV gas engine fan provides unmatched durability in our most compact size — perfect for departments that need extra space in apparatus compartments. Featuring a durable steel-frame, roll-cage design with 4-position tilt, this PPV has proven itself over the years. 716G4-B GAS POWERED PPV FAN BRIGGS 16" Engine: Briggs Vanguard HxWxD: 20″ x 20.5″ x 16″ – 508mm x 521mm x 406mm Blade Diameter: 16″ – 406mm Weight : 68 lbs – 31 kg RPM: 3,450 Set Back: 6 ft – 1.8 m Angle: 18° Output: 9,940 cfm – 16,890 cmh 718G4-B GAS POWERED PPV FAN BRIGGS 18" Engine: Briggs Vanguard HxWxD: 22″ x 23.5″ x 19.5″ – 559mm x 597mm x 495mm Blade Diameter: 18″ – 457mm Weight: 84 lbs – 38 kg RPM: 3,770 Set Back: 6 ft – 1.8 m Angle: 18° Output: 14,860 cfm – 25,247 cmh 720G4-B GAS POWERED PPV FAN BRIGGS 20" Engine: Briggs Vanguard HxWxD: 22.5″ x 26″ x 19.5″ – 648mm x 5660mm x 495mm Blade Diameter: 20″ – 508mm Weight: 94 lbs – 43 kg RPM: 3,385 Set Back: 6 ft – 1.8 m Angle: 18° Output: 17,235 cfm – 29,282 cmh 724G4-B GAS POWERED PPV FAN BRIGGS 24" Engine: Briggs Vanguard HxWxD: 28″ x 29.5″ x 21″ – 711mm x 749mm x 533mm Blade Diameter: 24″ – 610mm Weight: 120 lbs – 55 kg RPM: 3,245 Set Back: 6 ft – 1.8 m Angle: 18° Output: 21,100 cfm – 35,850 cmh Powered by a Honda GC160, this PPV gas engine fan provides unmatched durability in our most compact size — perfect for departments that need extra space in apparatus compartments. Featuring a durable steel-frame, roll-cage design with 4-position tilt, this PPV has proven itself over the years. 716GC GAS POWERED PPV FAN HONDA 16" Engine: Honda GC160 HxWxD: 20″ x 20.5″ x 16″ – 508 mm x 521 mm x 406 mm Blade Diameter : 16″ – 406 mm Weight: 70 lbs – 32 kg RPM: 3,775 Set Back: 6 ft – 1.8 m Angle: 18° Output: 10,230 cfm – 17,380 cmh 718GC GAS POWERED PPV FAN HONDA 18" Engine: Honda GC160 HxWxD: 22″ x 23.5″ x 19.5″ – 559 mm x 597 mm x 495 mm Blade Diameter: 18″ – 457 mm Weight: 78 lbs – 35.5 kg RPM: 3,360 Set Back: 6 ft – 1.8 m Angle: 18° Output: 13,223 cfm – 22,466 cmh 720GC GAS POWERED PPV FAN HONDA 20" Engine: Honda GC160 HxWxD: 25.5″ x 26″ x 19.5″ – 648 mm x 660 mm x 495 mm Blade Diameter: 20″ – 508 mm Weight: 88 lbs – 40 kg RPM: 3,185 Set Back: 6 ft – 1.8 m Angle: 18° Output: 15,499 cfm – 26,248 cmh Powered by a Honda GX120, this PPV gas engine fan provides unmatched durability in our most compact size — perfect for departments that need extra space in apparatus compartments. Featuring a durable steel-frame, roll-cage design with 4-position tilt, this PPV has proven itself over the years. 716G4-H GAS POWERED PPV FAN HONDA 16 " Engine: Honda GX 120 HxWxD: 20″ x 20.5″ x 16″ – 508 mm x 521 mm x 406 mm Blade Diameter: 16″ – 406 mm Weight: 74 lbs – 34 kg RPM: 3,530 Set Back: 6 ft – 1.8 m Angle: 18° Output: 11,740 cfm – 19,945 cmh 718G4-H GAS POWERED PPV FAN HONDA 18 " Engine: Honda GX200 HxWxD: 22″ x 23.5″ x 19.5″ – 559 mm x 597 mm x 495 mm Blade Diameter: 18″ – 457 mm Weight: 86 lbs – 39 kg RPM: 3,535 Set Back: 6 ft – 1.8 m Angle: 18° Output: 15,168 cfm – 25,770 cmh 724G4-H GAS POWERED PPV FAN HONDA 24" Engine: Honda GX270 HxWxD: 28″ x 29.5″ x 21″ – 711mm x 749mm x 533mm Blade Diameter: 24″ – 610mm Weight: 134 lbs – 61 kg RPM: 3,435 Set Back: 6 ft – 1.8 m Angle: 18° Output: 20,920 cfm – 35,545 cmh 730G4-H GAS POWERED PPV FAN HONDA 30" Engine: Honda GX 390 HxWxD: 39″ x 37″ x 27.5″ – 991mm x 940mm x 699mm Blade Diameter: 30″ – 762mm Weight: 163 lbs – 74 kg RPM: 3220 Set Back: 10 ft Output: 26,730 cfm – 45,415 cmh

Super Vac F Series Confined Space Fan

F124-F SERIES CONFINED SPACE FAN The F124 is a 12″, electric, single-speed, confined space fan designed for high power air movement in a compact size. Motor: Bluffton, single speed, TEAO, 1/3 Hp, 60/50hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 40 lbs: 18 kg RPM: 1725 Start: 2000W Run: 800W Output (Shroud) 1300 cfm – 2210 cmh Output (Venturi) 2100 cfm – 3570 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 HF124-SERIES CONFINED SPACE FAN The HF124 is a 12″, electric, high-single-speed, confined space fan designed for high power air movement for the toughest of jobs. Perfect for departments with the need to force or pull air deep into a structure or underground. Motor: Bluffton, single speed, TEAO, 1/2 Hp, 60/50hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 40 lbs – 18 kg RPM: 3450 Start: 2000W – 15 amp circuit Run: 800W Output (Shroud) 2750 cfm – 4670 cmh Output (Venturi) 3700 cfm – 6285 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 F124E-SERIES CONFINED SPACE FAN The F124E is a 12″, electric, hazardous location, single-speed, confined space fan designed for high power air movement in a compact size for all types of locations. The F124E is powered by a motor rated for Class 1 Group D environments. Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1/3 Hp, 60hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 42 lbs – 19 kg RPM: 1725 Start: 2000W Run: 800W Output (Shroud) 1300 cfm – 2210 cmh Output (Venturi) 2100 cfm – 3570 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 HF124E-SERIES CONFINED SPACE FAN The HF124E is a 12″,electric, hazardous location, high-single-speed, confined space fan designed for high power air movement for the toughest of jobs. Perfect for departments with the need to force or pull air deep into a structure or underground in all types of locations. The HF124E is powered by a motor rated for Class 1 Group D environments Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1/2 Hp, 60hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 42 lbs – 19 kg RPM: 3450 Start: 2000W – 15 amp circuit Run: 800W Output (Shroud) 2750 cfm – 4670 cmh Output (Venturi) 3700 cfm – 6285 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 VF124-SERIES CONFINED SPACE FAN The VF124 is a 12″, electric, variable-speed, confined space fan designed for high power air movement in a compact size that offers precise control of air movement. The VF124 will run on any 15 amp GFCI circuit and new hydraulic generators. Motor: Bluffton, variable speed, TEAO, 1 Hp, 60 hz, 115/230V HxWxD: 20.5″ x 15″ x 18″ – 521mm x 381mm x 457mm Blade Diameter: 12″ – 305mm Weight: 40 lbs – 18 kg RPM: 1725 Start: 2000W Run: 800W Output (Shroud) 1900 cfm – 3230 cmh Output (Venturi) 3100 cfm – 5265 cmh AF124-SERIES CONFINED SPACE FAN The AF124 is a 12″, pneumatic, confined space fan designed for high power air movement in a compact size that does not rely on gas or generators and can be used in environments with unknown gases. Motor: Pneumatic, 1/2 Hp HxWxD: 20.5″ x 15″ x 18″ – 521mm x 381mm x 457mm Blade Diameter: 12″ – 305mm Weight: 39 lbs – 18 kg Output (Shroud) 2800 cfm – 4755 cmh Output (Venturi) 3800 cfm – 6455 cmh F164-SERIES CONFINED SPACE FAN The F164 is a 16″, electric, single-speed, confined space fan designed to be the perfect combination of size and power. Perfect for users in need of an everyday ventilator. Motor: Bluffton, single speed, TEAO, 1/3 Hp, 60/50hz, 115/230V HxWxD: 19.25″ x 18.75″ x 13″ – 489mm x 477mm x 330mm Blade Diameter: 16″ – 406mm Weight: 44 lbs – 20 kg RPM: 1725 Start: 2000W Run: 700W Output (Shroud) 3200 cfm – 5435 cmh Output (Venturi) 5200 cfm – 8835 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 F164E--SERIES CONFINED SPACE FAN The F164E is a 16″, electric, hazardous location, single-speed, confined space fan designed to be the perfect combination of size and power. Perfect for users in need of an everyday fan that they can use in all types of environments, including ones with hazardous or unknown gasses. The F164E is powered by a motor rated for Class 1 Group D environments. Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1/3 Hp, 50/60hz, 115/230V HxWxD: 19.25″ x 18.75″ x 13″ – 489mm x 477mm x 330mm Blade Diameter: 16″ – 406mm Weight: 49 lbs – 22 kg RPM: 1725 Start: 2000W Run: 700W Output (Shroud) 3200 cfm – 5435 cmh Output (Venturi) 5200 cfm – 8835 cmh VF164-SERIES CONFINED SPACE FAN The VF164 is a 16″, electric, variable-speed, confined space fan designed to be the perfect combination of size and power. Perfect for departments in need of an everyday that offers precise control of air movement. The VF164 will run on any 15 amp GFCI circuit and new hydraulic generators. Motor: Bluffton, variable speed, TEAO, 1 Hp, 60 hz, 115/230V HxWxD: 24.25″ x 18.75″ x 18″ – 616mm x 476mm x 457mm Blade Diameter: 16″ – 406mm Weight: 52 lbs – 23.5kg Start: 2000W Run: 800W Output (Shroud) 3500 cfm – 5945 cmh Output (Venturi) 5900 cfm – 10,025 cmh AF164-SERIES CONFINED SPACE FAN The AF164 is a 16″, pneumatic, confined space fan designed to be the perfect combination of size and power. Perfect for users in need of an everyday that does not rely on gas or generators and can be used in environments with unknown gases. Motor: Pneumatic, 1-1/2 Hp HxWxD: 24.25″ x 18.75″ x 18″ – 616mm x 476mm x 457mm Blade Diameter: 16″ – 406mm Weight: 45 lbs – 20.5 kg Output (Shroud) 5100 cfm – 8665 cmh Output (Venturi) 9600 cfm – 16,310 cmh VF200-SERIES CONFINED SPACE FAN The VF200 is a 20″, electric, variable-speed, confined space fan designed for high power air movement for larger jobs, but still run on a 15 amp household circuit and that offers precise control of air movement. The VF200 will run on any 15 amp GFCI circuit and new hydraulic generators. Motor: Bluffton, variable speed, TEAO, 1 Hp, 60 hz, 115/230V HxWxD: 30.5″ x 24.75″ x 21.25″ – 775mm x 629mm x 540mm Blade Diameter: 20″ – 508mm Weight: 88 lbs – 40 kg Start: 2000W Run: 800W Output (Shroud) 6900 cfm – 11,720 cmh Output (Venturi) 9800 cfm – 16,650 cmh AF200-SERIES CONFINED SPACE FAN The AF200 is a 20″, pneumatic, confined space fan designed for high power air movement for larger jobs that does not rely on gas or generators and can be used in environments with unknown gases. Motor: Pneumatic, 1-1/2 Hp HxWxD: 30.5″ x 24.75″ x 21.25″ – 775mm x 629mm x 540mm Blade Diameter: 20″ – 508mm Weight: 60 lbs – 27 kg Output (Shroud) 6700 cfm – 11,380 cmh Output (Venturi) 9800 cfm – 16,650 cmh AF244-SERIES CONFINED SPACE FAN The AF244 is a 24″, pneumatic, confined space fan designed for high power air movement for the largest of jobs that does not rely on gas or generators and can be used in environments with unknown gases. Motor: Pneumatic, 5 Hp HxWxD: 33.5″ x 28″ x 23.75″ – 851mm x 711mm x 604mm Blade Diameter: 24″ – 610mm Weight: 105 lbs – 48 kg Output (Shroud) 9700 cfm – 16,480 cmh Output (Venturi) 14,200 cfm – 24,125 cmh

Super Vac Electric Smoke Ejectors

Electric, single-speed, smoke ejector designed for high power air movement in a compact size. Patented 4-Tip Recurve Aluminum Blade – holds up better than plastic in high heat Precision Balanced Blade – maximizes output Rubber Feet – heavy duty rubber adds friction to keep fan in place 4 Carry Handles – makes transportation easy with 1 or 2 people Front and Rear Guards – prevents accidental contact with key components 5 Year Warranty P124S ELECTRIC SMOKE EJECTOR STANDARD 12" Motor: Bluffton, single speed, TEAO, 1/2 Hp, 60/50hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 40 lbs: 18 kg RPM: 3450 Start: 2000W Run: 800W Output (Shroud) 2750 cfm – 4670 cmh Output (Venturi) 3700 cfm – 6285 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 P164S ELECTRIC SMOKE EJECTOR STANDARD 16" Motor: Bluffton, single speed, TEAO, 1/3 Hp, 60/50hz, 115/230V HxWxD: 19.25″ x 18.75″ x 13″ – 489mm x 477mm x 330mm Blade Diameter: 16″ – 406mm Weight: 44 lbs: 20 kg RPM: 1725 Start: 2000W Run: 700W Output (Shroud) 3200 cfm – 5435 cmh Output (Venturi) 5200 cfm – 8835 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 P200S ELECTRIC SMOKE EJECTOR STANDARD 20" Motor: Bluffton, single speed, TEAO, 1 Hp, 60 hz, 115/230V HxWxD: 25.5″ x 24.75″ x 16.25″ – 648mm x 629mm x 413mm Blade Diameter: 20″ – 508mm Weight: 85 lbs: 38.5 kg RPM: 1725 Start: 4000W Run: 1500W Output (Shroud) 5840 cfm – 9925 cmh Output (Venturi) 9800 cfm – 16,650 cmh P244S ELECTRIC SMOKE EJECTOR STANDARD 24" Motor: Bluffton, single speed, TEAO, 1-1/2 Hp, 60hz, 115/230V HxWxD: 28.5″ x 28″ x 18.75″ – 724mm x 711mm x 477mm Blade Diameter: 24″ – 610mm Weight: 110 lbs: 50 kg RPM: 1725 Start: 6000W Run: 2100W *20 amp circuit required to start and run Output (Shroud) 7790 cfm – 13,235 cmh Output (Venturi) 11,800 cfm – 20,050 cmh Hazardous Versions The electric, hazardous location, single-speed, smoke ejector designed for high power air movement in a compact size. Perfect for departments in need of an everyday smoke ejector that they can use in all types of environments, including ones with hazardous or unknown gasses. The motor is rated for Class 1 Group D environments. Patented 4-Tip Recurve Aluminum Blade – holds up better than plastic in high heat Precision Balanced Blade – maximizes output Rubber Feet – heavy duty rubber adds friction to keep fan in place 4 Carry Handles – makes transportation easy with 1 or 2 people Front and Rear Guards – prevents accidental contact with key components 5 Year Warranty P124SE ELECTRIC SMOKE EJECTOR EXPLOSION PROOF MOTOR 12" Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1/2 Hp, 60hz, 115/230V HxWxD: 15.5″ x 15″ x 13″ – 394mm x 381mm x 330mm Blade Diameter: 12″ – 305mm Weight: 42 lbs – 19 kg RPM: 3450 Start: 2000W Run: 800W Output (Shroud) 2750 cfm – 4670 cmh Output (Venturi) 3700 cfm – 6285 cmh P164SE ELECTRIC SMOKE EJECTOR EXPLOSION PROOF MOTOR 16" Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1/3 Hp, 60hz, 115/230V HxWxD: 19.25″ x 18.75″ x 13″ – 489mm x 477mm x 330mm Blade Diameter: 16″ – 406mm Weight: 49 lbs – 22 kg RPM: 1725 Start: 2000W Run: 700W Output (Shroud) 3200 cfm – 5435 cmh Output (Venturi) 5200 cfm – 8835 cmh P200SE ELECTRIC SMOKE EJECTOR EXPLOSION PROOF MOTOR 20" Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1 Hp, 60hz, 115/230V HxWxD: 25.5″ x 24.75″ x 16.25″ – 648mm x 629mm x 413mm Blade Diameter: 20″ – 508mm Weight: 93 lbs – 42 kg RPM: 1725 Start: 4000W Run: 1500W Output (Shroud) 5840 cfm – 9925 cmh Output (Venturi) 9800 cfm – 16,650 cmh P224SE ELECTRIC SMOKE EJECTOR EXPLOSION PROOF MOTOR 24" Motor: Bluffton, single speed, hazardous location rated for Group 1 Class D, 1-1/2 Hp, 60hz, 115/230V HxWxD: 28.5″ x 28″ x 18.75″ – 724mm x 711mm x 477mm Blade Diameter: 24″ – 610mm Weight: 115 lbs – 52 kg RPM: 1725 Start: 6000W Run: 2100W *20 amp circuit required to start and run Output (Shroud) 7790 cfm – 13,235 cmh Output (Venturi) 11,800 cfm – 20,050 cmh

Super Vac Electric Powered PPV Fan

Powered by a single-speed TEAO motor, this PPV electric fan provides unmatched durability in our most compact size — perfect for departments that need extra space in apparatus compartments. Featuring a durable steel-frame, roll-cage design with 4-position tilt, this PPV has proven itself over the years. Full-Roll Cage Frame: Protects key components 4-Position Tilt Frame with Lever: Provides -10°, 0°, 10°, 20° Fold-Down Ergonomic Handle: Folds down into frame for compact storage; features full-width handle for easy grip with heavy-duty gloves Flat-Proof Rubber Tires: Eliminates flat tires; rolls up stairs/curbs easily Single-Piece Cast Aluminum Blade: Holds up better than plastic in high heat Precision-Spun Steel Shroud: Provides durability with max airflow 716E2 ELECTRIC SINGLE SPEED PPV 16" Motor: Leeson, single speed, TEAO, 1 Hp, 60/50hz, 115/230V HxWxD: 20″ x 20.5″ x 16″ – 508mm x 521mm x 406mm Blade Diameter: 16″ – 406mm Weight: 68 lbs – 31 kg RPM: 1,725 Start Requirements: 4,000 w – 15-amp circuit Run Requirements : 1,500 w Set Back: 6 ft – 1.8 m Angle: 18° Output: 5,890 cfm – 10,007 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 718E2 ELECTRIC SINGLE SPEED PPV 18" Motor: Leeson, single speed, TEAO, 1 Hp, 60/50 Hz, 115/230V HxWxD: 22″ x 23.5″ x 19.5″ – 559mm x 597mm x 495mm Blade Diameter: 18″ – 457mm Weight: 82 lbs – 37 kg RPM: 1,725 Start Requirements: 4,000w – 15-amp circuit Run Requirements: 1,500w Set Back: 6 ft – 1.8 m Angle: 18° Output: 6,378 cfm – 10,836 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 720E2 ELECTRIC SINGLE SPEED PPV 20" Motor: Bluffton, single speed, TEAO, 1 HP, 60/50 Hz, 115/230V HxWxD: 25.5″ x 26″ x 19.5″ – 648mm x 660mm x 495mm Blade Diameter: 20″ – 508mm Weight: 88 lbs: 40 kg RPM: 1,750 Start Requirements: 4,000 w – 15-amp circuit Run Requirements: 1,500 w Set Back: 6 ft – 1.8 m Angle: 18° Output: 9,007 cfm – 15,302 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 724E2 ELECTRIC SINGLE SPEED PPV 24" Motor: Leeson, single speed, TEAO, 1Hp, 60/50hz, 115/230V HxWxD: 28″ x 29.5″ x 21″ – 711mm x 749mm x 533mm Blade Diameter: 24″ – 610mm Weight: 104 lbs – 47.5 kg RPM: 1,750 Start Requirements: 4,000w – 15-amp circuit Run Requirements: 1,500w Set Back: 6 ft – 1.8 m Angle: 18° Output: 13,320 cfm – 22,630 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 Powered by a variable-speed electric motor, this PPV electric motor fan provides the perfect combination of size and power for departments that want precise control and maximum output on a 15-amp circuit. Featuring a durable steel-frame, roll-cage design with 4-position tilt, this PPV has proven itself over the years. Full-Roll Cage Frame: Protects key components 4-Position Tilt Frame with Lever: Provides -10°, 0°, 10°, 20° Fold-Down Ergonomic Handle: Folds down into frame for compact storage; features full-width handle for easy grip with heavy-duty gloves Flat-Proof Rubber Tires: Eliminates flat tires; rolls up stairs/curbs easily Single-Piece Cast Aluminum Blade: Holds up better than plastic in high heat Precision-Spun Steel Shroud: Provides durability with max airflow 716EVS ELECTRIC VARIABLE SPEED PPV 16" Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC HxWxD: 20″ x 20.5″ x 16″ – 508mm x 521mm x 406mm Blade Diameter: 16″ – 406mm Weight: 72 lbs – 33 kg RPM: 2,500 Start Requirements: 2,000 w – 15 amp circuit Run Requirements: 1,500 w Set Back: 6 ft – 1.8 m Angle: 18° Output: 9950 cfm – 16,900 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 718EVS ELECTRIC VARIABLE SPEED PPV 18" Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC HxWxD: 22″ x 23.5″ x 19.5″ – 559mm x 597mm x 495mm Blade Diameter : 18″ – 457mm Weight: 86 lbs – 39 kg RPM: 2,400 Start Requirements: 2,000w – 15-amp circuit Run Requirements: 1,500 w Set Back: 6 ft – 1.8 m Angle: 18° Output: 10,744 cfm – 18,254 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 720EVS ELECTRIC VARIABLE SPEED PPV 20" Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC HxWxD: 25.5″ x 26″ x 19.5″ – 648mm x 660mm x 495mm Blade Diameter: 20″ – 508mm Weight: 92 lbs – 42 kg RPM: 2,400 Start Requirements: 2,000 w – 15-amp circuit Run Requirements: 1,500w Set Back: 6 ft – 1.8 m Angle: 18° Output: 13,788 cfm – 23,426 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6 724EVS ELECTRIC VARIABLE SPEED PPV 24" Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC HxWxD: 28″ x 29.5″ x 21″ – 711mm x 749mm x 533mm Blade Diameter: 24″ – 610mm Weight: 108lbs – 49 kg RPM: 2,400 Start Requirements: 2,000 w – 15-amp circuit Run Requirements: 1,500w Set Back: 6 ft – 1.8 m Angle: 18° Output: 16,370 cfm – 27,815 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6

Zoll AED Plus Pedi-Padz ll

The Only Full-Rescue AED with Intelligent Pediatric Capability The ZOLL AED Plus Intelligent Pediatric Capability includes voice and text prompts that tell rescuers that Pedi-padz II are connected, ensuring that the proper defibrillator electrodes are being used. When a cardiac arrest occurs, the fact is that only half of the victims will need a shock. The other half requires cardiopulmonary resuscitation (CPR). Separate and specific algorithms for adults and children are used to analyze a victim's heart rhythm. The ZOLL AED Plus can defibrillate children up to eight years of age, using the Pedi-padz II electrodes. Separate energy levels also have been incorporated for pediatric patients. Electronics in the AED Plus adjust defibrillating energy levels automatically so that suitable doses are delivered accurately, when needed. With ECG analysis designed specifically for a pediatric heart rate, coupled with appropriate defibrillation energy levels, the AED Plus can handle both adult and pediatric rescues. Pedi-padz II electrodes are designed especially for use with the AED Plus, and are also compatible with professional defibrillators, allowing continuity of care. The AED Plus does not rely on a resistor or other hardware in the wires to reduce delivered energy. Anatomical diagrams on the package facilitate proper pad placement. Indications for Use Patient Age: 0-8 Years Patient Weight: Under 55 lbs/25 kg Intelligent Pediatric Capability Devices: AED Plus and AED Pro Device Energy Levels: 50, 70, 85 Joules Patient Analysis: Analyzes based on pediatric – specific algorithm Electrode Specifications Shelf Life: 24 months Backing Material: Closed Cell Polyethylene Conductive Gel: Hydrogel Conductive Element: Tin Connection Method: Pre-attached Packaging: Paper/Polyfoil laminate Impedance Class: Low Length, Lead Wires: 34.0 inches / 86.4 cm Front Electrode Shape: Round Diameter, Total: 3.7 inches / 9.4 cm Area, Total: 10.75 square inches / 69.4 sq cm Diameter, Conductive Gel: 2.85 inches / 7.24 cm Area, Conductive Gel: 6.37 square inches / 41.1 sq cm Back Electrode Shape: Rectangular Length, Total: 5.43 inches / 13.8 cm Width, Total: 3.5 inches / 8.9 cm Area, Total: 19.0 square inches / 122.6 sq cm Length, Conductive Gel: 3.58 inches / 9.1 cm Width, Conductive Gel: 2.18 inches / 5.5 cm Area, Conductive Gel: 7.81 square inches / 50.3 sq cm

Zoll AED Plus Automatic External Defibrillator Battery Pack-10 Pack

Please Note: Replace the batteries in your AED Plus three years from the installation date of new batteries. 1. Ensure that the AED Plus is turned off. Open the battery compartment by removing the battery cover from the back of the unit. 2. Remove all batteries at once and dispose of old batteries properly. Place new batteries into the battery bank, observing battery polarity markings and making sure that all batteries are securely seated and properly oriented. After placing the first 5 to 9 batteries in the battery well, the INSTALL BATTERIES audio prompt reminds you to install the remaining batteries in the battery compartment. 3. After installing new batteries, press the Battery Reset Button inside the battery compartment when prompted. Pressing the button resets the battery usage indicator to full charge. 4. Close the battery compartment. 5. Turn the AED Plus over. 6. Locate battery replacement label which is included in the battery kit. 7. Write the battery replacement date on label. (Three calendar years from today’s date.) Example: If today’s date is (02/23/2012) the replacement date will be (02/23/2015). 8. Peel label from paper. 9. Affix label onto AED Plus below the “Status Indicator”, as displayed below. Explanation of Symbols: - Replace batteries on or before. Place the AED Battery Replacement Label below the AED Plus Status Indicator . Unlike every other AED, the AED Plus is powered by ten Lithium batteries available at any retail camera store. These aren’t your typical flashlight batteries, but smaller, more powerful and long-lasting Lithium batteries. How powerful and long-lasting are they? Five of them can develop, in ten seconds, the electrical charge needed to defibrillate a sudden cardiac arrest (SCA) victim. Together these ten Lithium batteries last five years. The ten Lithium batteries actually make up two separate, redundant power circuits; five batteries in each circuit. If one circuit ever fails, in a split second the AED Plus actually “changes batteries” by calling on the other circuit to provide the needed power. Immediately after such a “change of batteries,” however, a red X will appear in the status window and the AED Plus will tell you to change batteries. So even though your AED Plus has ten batteries, it only needs five at a time. And they can always change themselves. What’s In Reserve? The AED Plus tracks the usage of batteries as time passes. That’s why it asks you to push the little green button when you put in new batteries, which resets the clock to zero. When it determines that batteries need to be changed, it will display a red X in the status window and start beeping. When you turn it on, it will say “change batteries.” It will then continue with the rescue and deliver a shock, if needed. When the red X first appears, the AED Plus still has enough power in reserve to deliver more than 100 shocks. No other AED has this much power in reserve when it begins to tell you to change batteries. ZOLL Replacement Battery Pack for Zoll AED Plus, 10-pack: Battery Size: 123A For Use With: ZOLL AED Plus Battery Capacity: 1550 mAh

Zoll AED Plus Automatic External Defibrillator Adult D Pads

ONE ELECTRODE PAD IS EASIER THAN TWO Zoll's Full-Rescue AEDs feature CPR-D-padz, a one-piece, pre-connected electrode with Real CPR Help feedback. Ordinary AEDs require that the rescuer use two separate electrodes. By using CPR hand placement as the landmark, it is easy to place the CPR-D-padz on the victim quickly. The CPR-D-padz also lasts five years-the longest shelf life of any defibrillator electrode sold today. REAL CPR HELP Inadequate compression rate and depth are common during CPR. Adult victims need at least 100 compressions per minute and at a depth of at least 2 inches (5 cm). Compressions must be done well to effectively move blood and oxygen. The ZOLL AED Plus converts compression data instantaneously from the CPR-D-padz and provides an adaptive metronome to help the rescuer with the proper rate and depth, saying "Push harder" or "Good compressions," as needed. It also shows CPR compression depth on the display screen. ZOLL's AED Plus is the only AED that helps the rescuer achieve the correct rate and depth of chest compressions during CPR. No other AED has this capability. Five (5) year shelf life

Zoll AED Plus Automatic External Defibrillator

The Only AED With Real CPR Help The AED Plus is the only AED with Real CPR Help, real-time CPR feedback to help rescuers save a life. Only half of all sudden cardiac arrest victims will need a shock, while 100% will need high-quality CPR. Real CPR Help guides you every step of the way, telling you—and showing you— whether you need to “Push Harder” or whether you’re providing “Good Compressions.”Not all heart rhythms are “shockable,” but high-quality CPR can potentially convert a nonshockable rhythm into one that is shockable. Even if this isn’t possible, CPR will keep blood circulating until emergency help arrives. If a shock is required, CPR must begin immediately after the shock is delivered. The heart struggles as it tries to restore to a normal rhythm. Without CPR, a shock alone may be ineffective. Whether the victim requires a shock—or not—the AED Plus will support you 100% of the time. User-friendly Electrodes Design Speed is of the essence when treating a cardiac arrest victim. ZOLL’s CPR-D-padz electrodes feature a unique one-piece design to ensure fast and accurate placement. These electrodes come with a rescue accessory package, which contains scissors and other items that may be required. Low Cost of Ownership The AED Plus can help your organization’s bottom line. Once installed, the AED Plus has a low total cost of ownership, especially when considering the logistics of tracking and changing pads and batteries over the life of the AED. Thanks to the long shelf-life of the consumables, when you compare the cost of maintenance over 10 years, this is the most cost-effective AED to own. The AED Plus is powered by lithium batteries (available from retail outlets) that last five years, and the CPR-D-padz electrodes last five years as well if they are not used. Fully Automatic Option The fully automatic AED Plus is designed to make using an AED as simple as possible for a lay rescuer. If it detects a shockable heart rhythm, after a brief countdown, the AED Plus will deliver the shock automatically—no need for the rescuer to push the Shock button. There’s an App for That PlusTrac makes inspecting your AED regularly quick and simple. Download the CheckAEDTM App from PlusTrac to your smartphone or tablet after registering your AED. Then, when it’s time to inspect your AED, simply inspect its status indicator and log the AED’s readiness status in PlusTrac. You’re done. If anything needs correction or replacement, the person who’s managing your AED program will know right away. Even if you have a “mixed” population of AEDs from several different manufacturers, PlusTrac can manage them all. PlusTrac: just one more way that ZOLL provides unmatched support to save more lives. PlusTrac—Your Guarantee ZOLL’s PlusTracTM is a simple, yet comprehensive program management solution that requires a minimal time commitment and is designed to ensure that your AED will be ready if it’s ever needed. Studies have shown that having an AED program can potentially increase survival rates to 70% or more. All too often, AEDs are purchased with the best of intentions but are not regularly inspected. Volunteer rescuers typically receive CPR and AED training only once. Responders need refresher training every two years. AED programs are the most effective when there is a process that helps ensure both AED and responder readiness. For both inspection and training purposes, a product like PlusTrac could be your solution. Lives are not saved by AEDs alone. When cardiac arrest strikes, lives are saved by being prepared and using an AED that is maintained and fully operational—which means having a working battery and electrodes that have not expired. It’s ALL Online PlusTrac is an online system that you can access via an Internet connection and a web browser. It provides everything needed to manage one AED or 100, including reminders when volunteer responders are due for retraining. The AED Plus from ZOLL. No AED or manufacturer can offer you more. • The only AED with Real CPR Help – because every sudden cardiac arrest victim will need high-quality CPR • A one-piece electrode pad – to make applying the pads as simple as possible for the rescuer • A low total cost of ownership – there’s nothing to buy or replace for 5 years, as long as the device is not used Tech Specifications Measuring Chest Compression with Real CPR Help The force required to depress the chest during CPR varies with the patient’s size and build. The standard measure of chest compression quality, however, is not force but depth. The Real CPR Help technology in ZOLL’s CPR-D-padz includes a hand-placement locator, an accelerometer, electronics, and a processing algorithm that work together to measure vertical displacement in space as each compression occurs. One Size Fits All ZOLL’s one-piece electrode design accounts for anatomical variation. Based on extensive human data, CPR-D-padz meet the anthropometric chest characteristics of 99% of the population. If needed, the lower (apex) electrode can be separated and adjusted to accommodate the remaining 1% of the population. Simplified Placement Affixing two separate electrode pads to the patient’s bare chest can be confusing to a lay rescuer. ZOLL’s CPR-D-padz simplify this step by guiding placement of the red crosshairs at the center of the imaginary line connecting the patient’s nipples. Once in place, the hand-locator and the two electrode pads fall naturally into optimal position for both defibrillation and CPR. Five-Year Shelf Life All AED electrodes transmit defibrillating electricity into the patient via metal in close contact with a salt-infused gel that is positioned between the metal and the skin. Over time, however, the salt in the gel will corrode the metal and eventually compromise electrode functionality. ZOLL’s novel electrode design includes a sacrificial element that prevents significant corrosion for five years, which is unmatched in the market today. AED Plus Specifications Waveform: Rectilinear Biphasic Defibrillator Charge Hold Time: 30 seconds Energy Selection: Automatic preprogrammed selection (120J, 150J, 200J) Patient Safety: All patient connections are electrically isolated Charge Time: Less than 10 seconds with new batteries Electrodes: ZOLL CPR-D-padz, pedi-padz® II or stat-padz® II Self-test: Configurable automatic self-test from 1 to 7 days. Default = every 7 days. Monthly full-energy test (200J). Automatic Self-Test Checks: Battery capacity, electrode connection, electrocardiogram and charge/discharge circuits, microprocessor hardware and software, CPR circuitry and CPR-D sensor, and audio circuitry CPR: Metronome Rate: Variable 60 to 100 CPM Depth : 3/4" to 3.5"; 1.9 to 8.9 cm Defibrillation Advisory: Evaluates electrode connection and patient ECG to determine if defibrillation is required Shockable Rhythms: Ventricular fibrillation with average amplitude >100 microvolts and wide complex ventricular tachycardia with rates greater than 150 BPM for adults, 200 BPM for pediatrics. For ECG Analysis Algorithm sensitivity and specificity, refer to AED Plus Administrator’s Guide. Patient Impedance Measurement Range: 0 to 300 ohms Specifications subject to change without notice. Defibrillator: Protected ECG circuitry Display Format: Optional LCD with moving bar Size: 2.6" x 1.3"; 6.6 cm x 3.3 cm Optional ECG Viewing Window: 2.6 seconds Optional ECG Display Sweep Speed: 25 mm/sec; 1"/sec Battery Capacity: Typical new (20°C) = 5 years (225 shocks) or 13 hours continuous monitoring. End of life designated by Red X (typical remaining shocks = 9). Data Recording and Storage: 50 minutes of ECG and CPR data. If audio recording option is installed and enabled, 20 minutes of audio recording, ECG, and CPR data. If audio recording is disabled, 7 hours of ECG and CPR data. Patient Data Recovery: Windows® 98, Windows® 2000, Windows® NT, Windows® XP, Windows® 7, IBM- compatible PII with 16550 UART (or higher) computer. 64MB RAM. VGA monitor or better. CD-ROM drive. IrDA port. 2MB disk space. Device Size: (H x W x D) 5.25"x 9.50" x 11.50"; 13.3 cm x 24.1 cm x 29.2 cm Weight: 6.7 lbs; 3.1 kg Power: User-Replaceable Batteries. 10 Type 123A Photo Flash lithium manganese dioxide batteries Device Classification: Class II and internally powered per EN60601-1 Design Standards: Meets applicable requirements of UL 2601, AAMI DF-39, IEC 601-2-4, EN60601-1, IEC60601-1-2 Environmental Operating Temperature: 32° to 122°F; 0° to 50°C Storage Temperature: -22° to 140°F; -30° to 60°C Humidity: 10 to 95% relative humidity, non-condensing Vibration: MIL Std. 810F, Min. Helicopter Test Shock: IEC 68-2-27; 100G Altitude: -300 to 15,000 ft.; -91 m to 4573 m Particle and Water Ingress: IP-55 CPR-D-padz Shelf Life: 5 years Conductive Gel: Polymer Hydrogel Conductive Element: Tin Packaging: Multilayer foil laminate pouch Impedance Class: Low Cable Length: 48 in (1.2 m) Sternum: Length: 6.1 in (15.5 cm); Width: 5.0 in (12.7 cm); Length, conductive gel: 3.5 in (8.9 cm); Width, conductive gel: 3.5 in (8.9 cm); Area, conductive gel: 12.3 sq in (79.0 sq cm) Apex: Length: 6.1 in (15.5 cm); Width: 5.6 in (14.1 cm); Length, conductive gel: 3.5 in (8.9 cm); Width, conductive gel: 3.5 in (8.9 cm); Area, conductive gel: 12.3 sq in (79.0 sq cm) Complete Assembly: Folded Length: 7.6 in (19.4 cm); Folded width: 7.0 in (17.8 cm); Folded height: 1.5 in (3.8 cm) Design Standards: Meets applicable requirements of ANSI/ AAMI/ISO DF-39-1993

Super Vac Valor 18" Variable Speed PPV Fan with Handle Light - Clearance

V18-EV VALOR PPV FAN 18" ELECTRIC VARIABLE SPEED Powered by a variable-speed electric motor, this PPV fan provides unmatched durability in our most compact, powerful size — perfect for jurisdictions with a mixture of residential and commercial structures and the need for maximum output on a 15-amp circuit. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges. Motor: Bluffton, variable speed, 1.5 Hp, 60/50hz, 115/230V AC HxWxD: 23.5″ x 22″ x 21″ – 600mm x 560mm x 535mm Blade Diameter: 18″ – 457mm Weight: 84 lbs – 38kg RPM: 2,400 Start Requirement: 2,000w – 15 amp circuit Run Requirement: 1,500w Set Back: 9 ft 2.7m Angle: 14° Output: 10,744 cfm – 18,254 cmh *RPM is at 60Hz – for 50Hz – RPM and output should be multiplied by 5/6