800-558-8009
800-558-8009
0

Innotex Gray Hood 25 With PBI

Innotex Gray Hood 25 With PBI

$153.91

OVERVIEW

The INNOTEX GRAY™* Hood 25 is a particulate blocking hood designed to address this very issue. It helps to dramatically reduce the risks of carcinogenic particulate contamination while maintaining air permeability. Developed to meet the requirements of NFPA 1971, 2018 edition, the particulate blocking layer blocks carcinogenic particulates 0.1 µm to 1.0 µm that are found in the combustion of structural fires by greater than 98%. Yet, that same layer also allows for air permeation, which is essential to reduce the risk of increased core temperature.

Available in Medium/Large (Most Common Size) or XL

Description

THE INNOTEX GRAY™ HOOD 25 USES THE SAME 3-LAYER APPROACH AS TURNOUT GEAR. 

LAYER 1:   The exterior layer uses an outer layer of Gold 20%/80% PBI/Lenzing.

LAYER 2:   The middle layer consists of a proprietary version of Stedair® PREVENT. This layer blocks carcinogenic particulates 0.1 µm to 1.0 µm (microns) by greater than 98%. NFPA 1971, 2018 edition requires a minimum of 90%. Unlike some barriers, it is air permeable, which means air freely passes through it, letting body heat dissipate  and helping reduce the risk of increased core temperature. This layer also offers a 100% coverage throughout the entire hood.

LAYER 3:   The inner layer is a 100% FR viscose multi-filament liner. It gives a noticeably cool feeling when worn and has superior wicking abilities that spread out moisture to allow for quicker drying. The liner material is also less prone to piling than a standard Nomex/Lenzing material.

*Layers 2 & 3 are laminated together, reducing the bulk of multiple layers and increasing comfort.

FULL COVERAGE:

  • Shields vulnerable area between helmet & coat using an air permeable, carcinogenic particulate blocking layer. Smooth, cooling inner FR viscose multi-filament liner.
  • Full drape coverage around the shoulders and 100% protection coverage throughout the hoods. Flatlock stitch for maximum comfort with heavy 1/2” elastic that prevents stretching out when worn around the neck.

TECHNICAL DATA

  • The NFPA 1971: 2018 Edition THL requirement is a minimum of 325.
  • The NFPA 1971: 2018 Edition TPP requirement is a minimum of 20.
  • Particulate Blocking Layer (patent pending)
  •     INNOTEX GRAY™ Hoods use a proprietary version of Stedair® PREVENT, which blocks carcinogenic particulates 0.1 µm to 1.0 µm (microns) by greater than 99% (NFPA 1971: 2018 Edition requirement is a minimum of 90%).
  •     Tested for 100 washes.

FEATURES & BENEFITS

  • Color: Gold
  • Flatlock stitch for maximum comfort
  • 21’’ in length
  • Full drape coverage around the shoulders
  • 100% protection coverage throughout the hood
  • Heavy ½’’ Elastic prevents stretching out when worn around the neck
  • Air Permeable: The INNOTEX GRAY™ Hoods are air permeable, which means air can pass through them. Body heat can dissipate, helping reduce the risk of increased body temperature.
  • Optimized comfort

Additional information

Size

,

Brand

Innotex

You may also like…

Title