Waterous PB18-3030C Portable Pump

$5,200.00

OVERVIEW

Extraordinary water transfer and supply system
Vanguard V-twin air cooled Briggs and Stratton 18 horsepower engine
Delivers flow from 100 GPM @ 110 PSI to 400 GPM @ 15 PSI
3” female NPT intake with check valve and 3” female NPT discharge
Control panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control, panel light and 12 volt outlet
Rail base standard

Description

The Waterous PB18-3030C Portable Fire Pump is an extraordinary transfer and supply pump with exceptional flow capacity and good pressure for hand‐line operations.

Equipped with a V‐twin Briggs and Stratton® 18 HP (13.4 kW) engine. The PB18‐3030 also comes with a two‐year limited warranty and is CE marked.

GPM (LPM) PSI

Max Flow: 400 GPM (1500 lpm) 15 PSI (1.0 bar)
Max Pressure: 100 GPM (400 lpm) 110 PSI (7.6 bar)

PUMP SPECIFICATIONS:

Type: Transfer ‐ Supply

Intake: 3″ inch female NPT

Discharge: 3″ (inch) female NPT with check valve

Console: Operator’s panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control, panel light and 12 volt outlet

Volute Body and Head: High‐strength aluminum alloy, anodized for superior corrosion resistance

Impeller: High‐strength, corrosion‐resistant bronze, fully‐enclosed, double‐hubbed to balance hydraulic thrust, mechanically balanced to eliminate vibration

Wear Rings: Long wearing bronze. Easy to replace when required to restore original pump efficiency

Shaft Sleeve: High‐strength stainless steel

Shaft Seal: Spring‐loaded mechanical type

Priming: Combination spark arresting muffler and exhaust primer, fast and easy to use – Quarter turn bronze priming valve, operates with push/pull knob

Warranty: Waterous Two‐Year Limited Warranty

ENGINE SPECIFICATIONS:

Engine: Briggs & Stratton, model 356447, Vanguard V‐Twin air cooled, overhead valve (OHV) design delivers a maximum output of 18 HP (13.4 kW) @ 3600 RPM. 34.75 cu. in. (570 cc) displacement, 4‐cycle, gasoline fueled, horizontal shaft.

Lubrication: Full pressure lubrication system with an automotive style oil filter. Oil fill tube with dipstick.

Starter: 12‐volt electric and manual recoil.

Alternator: 16 A

BASES:

Rail:

Rigid steel channels
Control panel and fuel tank shipped loose

FUEL TANK:
Rail models will have a shipped‐loose, 3‐gallon (11 liter) fuel tank that meets the EPA evaporative requirement

Approximate Dimensions and Weights

Rail Base:

Length Width Height Dry Weight Ship Weight

19-3/4″ (50.2 cm) 20″ (50.8 cm) 21″ (53.3 cm) 113 lbs (51.3 kg) 141 lbs (64.0 kg)