Description
Simple to Operate
Turns on with easy-to-use pull handle
Every HeartStart OnSite comes ready-to-rescue. The device is pre-installed in the carrying case and battery and pads are pre-installed in the device. Simply pull the handle on the front of the AED to activate it.
Guided Audio Instruction
Talks you through your training
The HeartStart OnSite provides on-demand audio coaching. Calm, clear voice instructions are tailored to the responder’s actions, providing AED and CPR guidance during the resuscitation of a sudden cardiac arrest victim.
SMART Biphasic Therapy
Safely delivers maximum shock strength
Philips SMART Biphasic therapy uses a unique combination of high current – to maximize effectiveness, and a lower energy dose – to minimize side effects that are harmful to a fragile heart.
Built-in Self Test
Ready when needed
Your HeartStart OnSite goes through a 120-point test before it leaves the factory. On the job, it conducts self tests every single day, not just weekly. It performs over 80 different tests in all. Even the pads are tested for readiness.
Quick Shock Feature
Minimize chest compression interruptions
CPR is even more vital to survival than previously realized. Rapidly delivering shock after chest compressions is critical. The HeartStart OnSite’s Quick Shock feature reduces the time between hands-off and shock delivery.
Integrated SMART Pads
Senses application to patient skin
The pads are “smart” because they can sense that they have been removed from the cartridge and applied to the patient. This helps the HeartStart OnSite know at what point the user is in the response process.
Visual Queues
Clear, intuitive icon driven operation
The HeartStart OnSite’s graphics-based visual instructions are designed to communicate instantly, with minimum reading and interpretation. Users not fluent in the device’s language can follow easily.
Battery
Type | - 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells
|
Capacity | - Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003)
|
Install-by Date | - Battery is labeled with an install-by date of at least five years from date of manufacture
|
Standby Life | - Four years typical when battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses)
|
Product Specifications
Kit Contents | - Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner’s manual, quick reference guide
|
Waveform | - SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance
|
Defibrillation peak current – Adult | - 32 A (150 J nominal) into a 50 ohm load
|
Defibrillation peak current – Pediatric | - 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge)
|
Shock-to-Shock Cycle Time | - Typically less than 20 seconds between shocks in a series
|
Quick Shock | - Able to deliver a shock after the end of a CPR interval, typically in eight seconds
|
Voice Instructions | - Detailed voice messages guide responder through use of the defibrillator
|
CPR Coaching | - Instructions for adult and infant/child CPR available at user selection
|
Shock Delivery | - Via adhesive pads placed on patient’s bare skin as illustrated on pads
|
Controls | - Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button
|
Indicators | - Ready light, blue i-button, caution light
|
Environmental/Physical Requirements
Standby Temperature | |
Operating Humidity | - 0 to 95 % relative humidity (non-condensing)
|
Standby Humidity | - 0 to 75 % relative humidity (non-condensing)
|
Standby Altitude | - <gt/> 48 hours from 0 to 8,500 ft and <lt/>48 hours from 8,500 to 15,000 ft
|
EMI (Radiated/Immunity) | - Meets EN55011 Group 1 Level B Class B and EN61000-4-3
|
SMART Pads
Energy delivered | - Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load
|
How Supplied | - Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution
|
Active Surface Area | |
Cable Length | - Adult pads: 137 cm (54″); Infant/Child pads: 102 cm (40″)
|
Use-by Date | - Cartridge is labeled with a use-by date of at least two years from date of manufacture
|
Training pads (optional) | - Special pads put HeartStart OnSite into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins
|
Environmental/Physical Requirements
Sealing | - Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1
|
Operating Temperature | |
Operating Altitude | - 0 to 4,500 m (0 to 15,000 ft)
|
Shock/Drop Abuse Tolerance | - Withstands 1 meter drop to any edge, corner, or surface
|
Vibration | - Meets EN1789 random and swept sine, road ambulance specification in operating and standby states
|
Automated and User-activated Self-tests
Daily Automatic Self-tests - Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity
| |
Pad Integrity Test | - Specifically tests readiness-for-use of pads (gel moisture)
|
Battery Insertion Test | - Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness
|
Status Indicator | - Blinking green “Ready” light indicates ready for use. Audible “chirp” indicates need for maintenance
|
Data Recording and Transmission
Infrared | - Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol
|
Data Stored | - First 15 minutes of ECG and the entire incident’s events and analysis decisions
|
