Ziamatic Archives

Sale!
Ziamatic Bolt Cutter Brackets
Original price was: $160.90.Current price is: $120.00.
OVERVIEW
Powder-coated cast aluminum bracket secures head
Heavy-duty, nylon hook & loop straps hold the bolt cutter handles firmly in place
Designed for use with 18″ to 36″ bolt cutters with adjustable stop & pin
One each BCB-FS-05 fixed strap and one each BCB-VS-0565 variable strap are provided with each bracket
Add to cart Details
Sale!
Ziamatic Choc Holder
Price range: $62.50 through $115.00
OVERVIEW
Sized to fit 32" Ziamatic wheel chocks (non-folding style)
32" style is available in either horizontal or vertical mount
Price listed is for a single holder
Select options Details
Sale!
Ziamatic Extrication Tool Holder For Battery-Powered Cutter
Original price was: $612.55.Current price is: $450.00.
OVERVIEW
Model QM-ET-MV - A fully adjustable, upright extrication tool mounting solution. Secures many popular models of cutter, spreader, and combination tool upright in the compartment
Features more than ten individually adjustable components, including tilt angle, for a more secure, custom fit
Raised cradle arm grips the tool handle and supports the weight of the tool’s battery end
Accommodate a new/replacement tool with only a few minor adjustments
Eliminates the need for expensive custom fabrication
Heavy-duty, lightweight aluminum construction that won’t rust or stain
Mounts to nearly any flat surface
Select options Details
Sale!
Ziamatic Fixed Chain Saw Mount
Price range: $215.00 through $235.00
Mount chains saws, abrasive cut-offs saws, and other gasoline-engine tools on these specially designed brackets. An absorbent pad collects fluids and may be replaced as required, keeping the compartment clean. A heavy-duty safety strap secures the saw on the bracket. Two sizes available:
Small - Dimensions 10" wide x 15" long
Large - Dimensions 11.5" wide x 17.5" long
Select options Details
Sale!
Ziamatic Folding Attic Ladder Brackets
Price range: $136.00 through $140.00
OVERVIEW
Model FLB for use with Duo Safety Series 585-A Folding Ladders. Set of two brackets. Closed inside dimensions are 3″D x 1-13/16″.
Model FLBA for use with Alco-Lite Model ALP-080 Folding Ladders. Set of two brackets. Closed inside dimensions are 2-3/16″ D x 1-1/2″.
Powder-coated gray finish. May be mounted vertically or horizontally.
These rugged, high-tensile strength aluminum alloy brackets secure a folding ladder in minimal space.
The spring-loaded handle provides positive locking action to assure that folding ladder remains secure when vehicle is in motion. To release, the handle is simply pulled straight out and turned to one side.
Select options Details
Sale!
Ziamatic General Purpose Bolt Cutters
Price range: $105.00 through $265.00
OVERVIEW
Suitable for medium-hard and soft bolts, rods, rivets, bars, chains, concrete rods, etc.
Cut up to Brinell 370 – Rockwell C-40. Exceeds GGG-C-740d Federal Specs
Four sizes available:
18″ - Model HIT-450 – Cuts 5/16″ medium & soft bolts, 1/4″ HRC-40
24″ - Model HIT-600 – Cuts 3/8″ medium & soft bolts, 5/16″ HRC-40
30″ - Model HIT-750 – Cuts 1/2″ medium & soft bolts, 11/32″ HRC-40
36″ - Model HIT-900 – Cuts 5/8″ medium & soft bolts, 3/8″ HRC-40
Ziamatic #BCB mounting bracket also available as an option
Select options Details
Sale!
Ziamatic Load & Lock Walkaway Brackets
Price range: $132.50 through $142.50
OVERVIEW
The Load & Lock is our most economical SCBA bracket that meets NFPA standard for use inside a crew compartment. Unassembled “Knock-down” SCBA brackets are a more economical option and require assembly in the field. All hardware is included. Features:
The simplistic design allows the bracket to work with many different makes and models of SCBA with minimal set up time
Heavy-duty nylon strap firmly retains cylinder until released by pulling out on the release lanyard
Backplate, footplate, and seats are thermoplastic-coated steel
KD-ULLH is NFPA compliant and third party tested to exceed the 11G standard. KD-ULLH-LF is NFPA compliant and third party tested to exceed the 11G standard (with footplate)
Accommodates 30 and 45-minute cylinders
Brackets for 60 minute cylinders require the purchase of a longer footplate
Select options Details
Sale!
Ziamatic Multiple Extrication Tool Holders
Price range: $1,275.00 through $1,800.00
OVERVIEW
Secure up to four extrication tools in the space of one with this easy-to-use “Lazy Susan” rotating platform.
Adjustable mounting brackets accommodate most brands of cutter, spreader, and combination tool- including both hydraulic and battery-powered models.
Simply raise the center knob and rotate the turntable to access the tool you need.
Turntable safely locks into place after each 90-degree rotation for quick and safe tool retrieval.
Available in holder only, holder with one or two ram options and holder without brackets
Select options Details
Sale!
Ziamatic Neoprene Cup Mounts
Price range: $117.50 through $140.00
OVERVIEW
Ideal for storage of cylindrical items such as SCBAs, medical oxygen cylinders, fire extinguishers and water cans
Requires only three bolts (included) to install
Durable neoprene is not affected by moisture or rotting
For 5.3″ to 5.8″, 6.1″ to 6.9″ and 7.1″ to 7.4″ diameter cylinders
Select options Details
Sale!
Ziamatic Quic-Bar Tool
Price range: $272.50 through $330.00
OVERVIEW
Alloy steel, providing high-tensile strength, hardness and resilience for maximum power
The tapered pike is ideal for forcing padlocks or driving into material to facilitate prying. The pry and wedge ends are narrower than other brands for faster, easier penetration. Greater width and curvature on the wedge provides powerful leverage for prying operations.
Easily coupled with an axe
Reflective tape makes the tool easy to locate in darker conditions
This model is constructed of three pieces, swage-fit together and pinned for exceptional strength and durability
Lengths: 24", 30", 36" and 42"
Available in black or chrome
Select options Details
Sale!
Ziamatic Quic-Choc Folding Wheel Chocks
Price range: $115.00 through $480.00
OVERVIEW
“The Fire Industry’s Most Popular Chock”
A strong, dependable wheel choc for use with tires up to 44″ in diameter.
Easily folds up and tucks away under the running board, providing you with increased safety in less space.
Features high-tensile strength aluminum construction, a large rear-opening hand grip, and a double row of rugged teeth that grip virtually any hard surface.
“Easy-Grip” carrying handle protects fingers and makes transportation a breeze.
NFPA and SAEJ348 compliant and third-party tested.
Each choc requires an area of only 6″H x 10-1/2″W x 20-3/8″D for storage.
The Folding Wheel Chocks easily folds up and tucks away under the running board when utilizing the #SQCH-44-H holder. Please note that pricing is per item - for a pair of two chocks and/or holders - please select a quantity of two
Select options Details
Sale!
Ziamatic Quic-Choc Wheel Chocks
Original price was: $192.15.Current price is: $142.50.
OVERVIEW
High-tensile strength aluminum construction, large rear-opening hand grip, and double row of rugged teeth to grip virtually any firm surface.
Recommended for tires up to 32″ in diameter.
WARNING: undersized chocs may fail to restrain vehicle . The vehicle may either roll over or crush an undersized choc, possibly resulting in bodily injury or property damage.
NFPA compliant, SAEJ348 compliant, and third-party tested.
8-1/2″ H x 8″ W x 14-13/16″ L.
Price listed is per chock
Add to cart Details

Ziamatic

Title