OVERVIEWThis long-life battery uses a disposable, lithium manganese dioxide and has a five-year shelf life plus a (typical) four-year installed life. A spare battery should be stored with the defibrillator. Additional batteries should be purchased for defibrillators used frequently for training and/or demonstrations. Every minute counts when a emergency cardiac event occurs, and preparation and having properly functioning AEDs increase the chances of victims surviving. Safety equipment might remain unused for years, but you want it to work when you need it. Philips AEDs use long-life batteries that last four years when installed. Stored batteries last up to five years, so keeping a backup makes a sound safety strategy. Organizations that use AEDs often for demonstrations and training should keep several backup energy sources on hand. The Philips replacement battery works on the HeartStart OnSite and Frx models of defibrillators. The battery also works with Philips models M5066A, M5067A, M5068A and 861304
- Sale!
OVERVIEW
Dangers on mining and excavation sites range from falling rock and debris to heavy machinery hazards, which led to the development of the unrivaled DM Hybrid™.- Extreme protection for critical impact points on back of hand and fingers
- Combines patended Hexagonal Memory Gel with patent pending Ripple Grip
- One piece, enhanced synthetic leather increases durability while providing full dexterity
- 3-D Design TPR on back of hand and fingers for maximum impact protection
- Reinforced saddle for extra layer of Kevlar between thumb and forefinger adds protection and padding to this typical wear point
- Kevlar thread palm stitching for added durability
- Reflective Hi-Vis for hand visibility
- Perfect glove for underground mining, heavy construction, oil/gas refining, drilling, tool pushing, extracting, fracting, barrel drum handling, demolition and any job where vibration and impact is present.
- Sizes: Medium, Large, 2XL, 3XL
- Sale!
OVERVIEW
Hard plastic case provide a safe and convenient method for transporting and storing your calibration cylinders. Models:- 500A - Holds four (4) 17 or 34 liter cylinders
- 500B - Holds one (1) 58/103 liter cylinder and two (2) 17/34 liter cylinders
- 500C - Holds three (3) 58/103 liter cylinders
- 500D - Holds two (2) 17 liter or 34 liter cylinders
- 505 - Holds two (2) 58/103 liter cylinders
- Sale!
OVERVIEW
- Securely mount your extinguisher in a truck or boat
- Painted powder coat steel
- Available for ABC 5, 10 or 20 lbs and 2.5 gallon water pressure
- Sale!
OVERVIEW
Heavy Duty- The new standard in intrinsically safe protection – The TR-800 is a PAPR blower rated at Division I for Classes I,II, and III under the most current UL standard (UL 60079, 6th Edition, 2013)
- Cover your bases - Utilize cartridges to help protect against certain gas and vapors, combined with filters for protection against particulates.
- Feel heightened comfort - Heavy-duty belt designed with airflow channels, multiple size adjustments and belt extender options.
- Work with ease - Intuitive, colored touchpoints plus visual and audible alarms help make the TR-800 easy to use.
- Keep the air flowing - Multi-speed blower functions up to 16,000 feet and battery offers long run time, less charge time and, ultimately, reduced down time.
- The new standard in intrinsically safe protection – The TR-800 is a PAPR blower rated at Division I for Classes I,II, and III under the most current UL standard (UL 60079, 6th Edition, 2013)
- More options for more tasks - Choose from particulate filters or gas and vapor combination cartridges for protection in a variety of environments.
- Work at your own speed - Multiple airflow rates put you in control of your comfort.
- When clean is critical - Easy-to-clean belt and optional disposable breathing tube covers and storage and cleaning kit save time and effort, paving the way for more productivity.
- Intrinsically Safe motor/blower (TR-802N)
- Intrinsically Safe Battery (TR-830N)
- Battery attachment tool (TR-838)
- Airflow Indicator (TR-971)
- Easy Clean Belt (TR-627)
- Length Adjusting Breathing Tube (BT-30)
- Sale!
OVERVIEW
The Standard Portable Speed Bump is designed for temporary placement on roads, parking lots, warehouse floors, etc., to slow vehicle speed. It is made of durable, impact and UV resistant polypropylene and will not fade or crack. It can withstand 20,000 pounds and has black rubber on the bottom to prevent sliding when being run over.- 10′ when extended
- Rolls up for storage – 20″ diameter
- Each section has high-intensity reflective tape on the front and back
- Made of heat and cold resistant polypropylene
- Will not fade or crack
- Includes a durable nylon zipper bag for transportation and storage
- 4 Sections include bright yellow LEDs on the front and back
- 10′ when extended
- Rolls up for storage – 20″ diameter
- Each section has high-intensity reflective tape on the front and back
- Made of heat and cold resistant polypropylene
- Will not fade or crack
- Includes a durable nylon zipper bag for transportation and storage
- Sale!
OVERVIEW
- Calibrate your monitors with this reactive gas
- 58 liter aluminum cylinders with 6 month shelf life
OVERVIEW
Wrap your firearm in the protection provided by this Fireflex pistol case. Each Fireflex pistol case is made of Firefighters Merchandise’s proprietary moisture resistant and durable Fireflex® material. The case has a super-soft interior to guard your gun’s finish. Generous foam padding snuggly conforms to the shape of your firearm to secure it inside and protect it from bumps and jolts. Durable YKK zippers stand up to rigorous use. The Firefighters Merchandise pistol case portrays the firefighter style with the rugged durable look every firefighter demands. Weight 1 lbs and is 11 x 8 x 2 in
Please note that this item has been discontinued by the manufacturer. We currently have two (2) black on hand.OVERVIEW
Radnor® 10 Person Contractor First Aid Kit in a plastic carrying case contains 95 pieces to treat on the job injuries. The kit comes in plastic weatherproof case to keep contents free of moisture and dust. The storage case has two latches to keep the case closed and a handle to facilitate transportation to the site of an injury. The case also includes mounting holes in the handle for mounting the case on a wall or other flat vertical surface.- First Aid supplies for 10 or more people
- OSHA compliant
- Handle for easy transportation to injury site
- Wall-mountable
- 95 Pieces
- 8.5" L x 3.24" W x 5" H
OVERVIEW
Ideal for rescue and rope access, this anodized carabiner’s patented key-lock design does not hang up when unclipping from your harness or web. An optimized D-shape maximizes its strength, and its wide gate opening fits over 1-inch (25-mm) diameter railings, unusual for a carabiner this compact and light. Safety indicators etched on the gate augment easy one-hand operation. Manual-Lock and Auto-Lock versions are available with a removable keeper pin for use with lanyards or for terminating escape or RIT lines. Please enter coupon code CMC5 at time of checkout to received a 5% discount on this item. Please note that multiple coupon codes can be entered at time of checkout.OVERVIEW
MCR Safety's headgear and face shields offer superior protection from liquid splashes and flying debris that would otherwise be damaging to the face. An assortment of brackets and face shield sizes and materials make it a good bet that you can find an option just right for you. The 181540 is a clear Polycarbonate visor that measures 8 inches x 16 inches and is .040 thick.- Face Shield - Clear Polycarbonate Material
- Measures 8 Inches x 16 Inches
- .040 Thickness
- Sale!
OVERVIEW
Intrinsically safe impact and shock resistant LED flashlight that provides a soft flood light and 155 hours of run time.
