OVERVIEW
- Lightweight and comfortable
- Guaranteed flame resistance for life of garment
- Protects against radiant and convective heat
- ARC2
- Dual hazard protection
- 2 pockets for secure storage
- Button cuffs for a secure and comfortable fit
- Shirt tail hem stays tucked in
- Standards ASTM F1959/F1959M-12 (ATPV 8.2 CAL/CM2 (HAF 69.1%), ASTM F1506-10a, NFPA® 2112, NFPA® 70E, EN ISO 11612 (A1+A2. B1. C1)
- Available in Gray, Khaki or Navy
OVERVIEW
Radians RW32 is heavy duty rainwear with Reflectivz® waterproof and high visibility technology. The 300D PU coated, high visibility rip stop oxford material provides extra durability. With the addition of 3M® silver reflective tape, you can feel confident you will be protected in tough environments. The RW32 rainwear series includes a rain jacket and bib pant with optional knee pads, all sold separately.- 300D PU Coated Rip Stop Oxford Hi-Viz Polyester Material
- Waterproof per ANSU 107, 7.5.3 (AATCC 127 2008)
- Breathable per ANSI 107, 7.6 (ASTME96-05)
- 3M® 8906 2" Silver Reflective Tape
- 2 Horizontal, 2 Vertical and 2 Sleeve Stripes
- Cape Vented Front & Back Cap with D-Ring Pass Through
- Adjustable Elastic Sleeve Cuffs with Hook & Loop Closure
- Attached Hood
- Mic Tabs on Both Shoulders
- Zipper Front Closure with Snap Closure Storm Flap
- 2 Lower Front Pockets, Flap Covered Chest Pocket, Chest Pocket, Fleece Lined Inside Pocket
- 25 Wash Max
- Pants have internal pocket for optional flexible foam 10” x 6” knee pads
- Available in sizes Medium-5XL
- Sale!
OVERVIEW
- Meets ANSI 107-2010 Class 3 Standard
- 10 oz 100% ANSI certified fluorescent lime polyester fleece
- 2 large slash pockets
- Detachable hood with drawstring
- Full front zipper closure
- Sizes: S-5X
- Color: Lime Green
- Sale!
OVERVIEW
Lakeland Interceptor Plus, Level A suits are gas tight and are the ultimate line of chemical protection. INT640B front entry suits are configured with gloves, boots, face shield, and heat-sealed seams. Available in sizes SM-5X, these protective suits are ideal when the maximum level of chemical protection is needed, like emergency response and HazMat operations. Available in small, medium, large, XL, 2XL, 3XL and 4XL (Sizing is based upon height and weight - please contact us for information to properly size your suit) Please note this is an updated version of prior model 80640. - Sale!
OVERVIEW
- One-Piece, 3D, Direct-Injected Thermoplastic Rubber: adds impact protection for entire back of hand and fingers, with elevated knuckles.
- One-Piece Palm with Kevlar® Stitching: adds durability and longevity.
- TefSecure Silicone Grip Grid: adds oil, water and petro-chemical resistance, and grip control.
- Long-Cuff Design: adds protection, comfort and "tear-away" ability with heavy machinery.
- Curved Fingers: matches natural contour of hand for less hand strain.
- Easy-Pull Tabs: allows user to add name to glove, and easily pull glove on.
- Available Sizes: Small-4XL
- Sale!
OVERVIEW
Hazards on job sites that operate in cold weather are increased as the temperature dips, leading to the need for protective gloves with excellent grip and insulation.- MicroSable Interior Lining: Adds insulation and resists pilling for added comfort and longevity.
- Flexible TPR: Protects fingers, thumb, back of hand and knuckles from cuts and scrapes, while providing time to pull hand out of glove if caught in machinery.
- Long-Cuff Design: Adds protection, comfort and “tear-away” ability if caught in heavy machinery.
- One-piece Palm with Kevlar Thread Stitching: Adds durability and longevity.
- SkidX Grip: Adds oil, water, and petro-chemical resistance, as well as heightened gripping power for wet, oily or dry surfaces.
- Available in sizes: Small-4XL
OVERVIEW
- Max-Dri™ Moisture Wicking mesh in Hi-Viz Green or Hi-Viz Orange
- Available with either long or short sleeves
- 2” heat transfer reflective tape
- One upper left front pocket
- Collar with two buttons
- Meets ANSI/ISEA 107-2010 Standards
- Available in sizes M, L, XL, 2XL, 3XL, 4XL and 5XL
OVERVIEW
- 2" Heat Applied Segment Reflective Tape with Contrasting Trim
- 100% Rip Stop Polyester Solid Front with Polyester Silk Feeling Mesh Back
- Zipper Front Closure Reinforced with Durable Webbing Reinforcement
- Reflective Trim Crossing the Edge and Around Arms
- Black Padded Neck for Comfort and Hide Dirty
- Two Chest Hidden Pockets and Mic Tabs
- Two Lower Outside Pockets with Flaps and Grommets. Two Bottle Pockets on Each Side with Elastic Fasten
- Two Lower Inside Patch Pockets, Hidden Back Pouch with Left Zipper Opening
- Certification: ANSI/ISEA 107-2015 Type R Class 2
- Sale!
OVERVIEW
- Meets ANSI Class E standard with 2" wide reflective stripes
- Meets ANSI Class 3 standard when worn with a Class 2 or Class 3 vest or jacket
- Lime Green Waterproof Poly Oxford material with PU coating providing the maximum visibility
- Waterproof taped seams
- Adjustable zippers on angles for safety and comfort
- Two pass-through slits for front pocket access
- Elastic and draw string on waist
- Available Sizes: S-5XL
- Sale!
OVERVIEW
- Meets ANSI 107-2015 Class 3 Standard with 2" wide reflective stripes
- Shell: Fluorescent Poly Oxford with 300D PU coating & waterproof taped seams
- Removable Fleece Lining & Insulated Collar
- Heavy duty zipper front closure
- Rib knit stretch waist band & cuffs
- Removable hood tucks into the collar with draw string
- 1-inside chest pocket / 1-radio pocket / 1-ID pocket/ 1- pen/tool pocket and 2-large slash zipper pockets/ 2- Microphone tabs
- Color: Lime
- Sizes: XS-5XL
- Sale!Zytron® 500 is the classic emergency responder choice for hazmat response and other demanding situations. It's tough, built for mobility, and based on patented technology that created the first material to survive eight full hours against the ASTM F1001 Test Battery with no breakthrough. Now with an extensive chemicals-tested list numbering in the hundreds, it's no wonder that responders around the world trust Z500 garments for ultra-demanding Level A and Level B applications. Model #Z5H582-94C2RPBC is a NFPA 1990 (1994) Class 2 Certified Vapor Total Encapsulating Suit with Front Entry and the following features:
- AquaSeal® Gas-Tight Zipper
- Double Storm Flaps with Hook & Loop Closure
- Expanded View AntiFog Visor System
- Expanded Back
- Field Replaceable 2N1® Glove System and Removable Nomex/Leather Overgloves
- Attached Sock Booties with Splash Guards
- 2 Exhaust Valves and Radio Pocket
- Berry Compliant
800-558-8009
