OVERVIEW
- Waterproof
- Fleece Lined
- Touchscreen
- Tech-Ready
- Terry Thumb
- Sizes available: Small-2XL
- Sale!
- Sale!
OVERVIEW
When safety, extrication, and search and rescue operations happen in wet or humid environments, having hand protection that combines cut and puncture resistance with a waterproof seal is essential.- Flexible TPR: Adds complete metacarpal protection and continuous coverage from knuckles to fingertips, including extensive web and thumb coverage.
- SkidX Grip™: Adds oil, water and petrochemical resistance, as well as heightened grip control in wet, oily or dry environments.
- Antimicrobial Barrier Lining: Porous, waterproof liner that keeps liquids out of the glove, while remaining breathable for hand comfort during use.
- One-Piece Palm with Kevlar ® Stitching: Adds abrasion resistance, durability and longevity in high-wear areas.
- High-Level Cut Resistant Palm: Exceeds most site standards.
- 3M™ Reflective Striping: Enhances hand visibility in low-light or hazardous situations.
- 500D Spandex Wrist Closure: Ensures debris is kept out of glove and reduces bacterial growth.
- Passes ASTM F1670/F1670M-17a: Testing for Penetration of Blood and Bodily Fluids
- Industries: Search & Rescue, Extrication, Heavy Construction, Gas & Oil Drilling, Tool Pushing, Rigging, Mining
- Available In Sizes: Small-3XL
- Sale!Mount chains saws, abrasive cut-offs saws, and other gasoline-engine tools on these specially designed brackets. An absorbent pad collects fluids and may be replaced as required, keeping the compartment clean. A heavy-duty safety strap secures the saw on the bracket. Two sizes available:
- Small - Dimensions 10" wide x 15" long
- Large - Dimensions 11.5" wide x 17.5" long
- ANSI cut level A4HPPE outer layer combined with warm 7 gauge acrylic liner. Tested for both cut and heat protection. Flexible sandy nitrile coating. Features: ● ANSI cut level A4 ● Flexible sandy nitrile coating offers great grip in wet and dry conditions ● Provides over 650°F contact heat protection ● Specially designed for use in cold conditions ● Warm 7 gauge acrylic liner for extreme cold protection ● Level D cut resistance ● 7 gauge liner for dexterity ● Available in sizes up to 3XL ● Double dipped coating for durability
- Sale!
OVERVIEW
Designed to deliver comfort, warmth, and durability during marine operations, the MJ6214 T1 Classic Flotation Bomber Jacket's closed-cell foam insulation will provide flotation and in-water insulation to delay the onset of hypothermia in the event of water immersion. Coupled with functional design elements such as fleece-lined pockets and a storm flap, Mustang Survival's MJ6214 T1 Classic Flotation Bomber Jacket adds up to an unbeatable value. The MJ6214 T1 Version includes SOLAS reflective tape across the chest and around each wrist to provide increased visibility. Suitable for the requirements of Industrial, Regulatory, and Military environments, the Classic Flotation Bomber Jacket is a standard piece of uniform for many government agencies, as well as everyday recreational activities such as boating, fishing or sailing.- Relaxed fit for mobility and comfort
- 62 square inch of reflective tape
- Neoprene wrist seals
- Pen pocket on right sleeve
- 4 front pockets
- 1 large pocket on the inside of the jacket
- Full-length storm-flap
- Internal waist belt to reduce ride-up
- Fleece-lined front pockets
Small:- Chest 34" - 38"
- Waist 28" - 30"
- Length 27.5"
- Chest 38" - 42"
- Waist 32" - 34"
- Length 31"
- Chest 42" - 46"
- Waist 36" - 38"
- Length 32"
- Chest 46" - 50"
- Waist 40" - 42"
- Length 33"
- Chest 50" - 54"
- Waist 44" - 46"
- Length 34"
- Chest 54" - 58"
- Waist 48" - 50"
- Length 35"
Approval: USCG - UL1123 - Marine Buoyant Devices 160.064 - Type III - Sale!
OVERVIEW
Hazards on job sites that operate in cold weather are increased as the temperature dips, leading to the need for protective gloves with excellent grip and insulation.- MicroSable Interior Lining: Adds insulation and resists pilling for added comfort and longevity.
- Flexible TPR: Protects fingers, thumb, back of hand and knuckles from cuts and scrapes, while providing time to pull hand out of glove if caught in machinery.
- Long-Cuff Design: Adds protection, comfort and “tear-away” ability if caught in heavy machinery.
- One-piece Palm with Kevlar Thread Stitching: Adds durability and longevity.
- SkidX Grip: Adds oil, water, and petro-chemical resistance, as well as heightened gripping power for wet, oily or dry surfaces.
- Available in sizes: Small-4XL
OVERVIEW
- Foam padded rope control channel on palm
- Premium synthetic leather palm and fingertip patches
- Heavy duty leather material between fingers for extra durability
- Incredible fingertip dexterity allows knot untying without removing gloves
- Secured cuff closure with hook and loop TPR pull tab closure
- Reflective markings on top of hand for better visibility
- Kevlar stitching
- Available in black or red
OVERVIEW
- TPR impact protection on top of hand and full length of fingers
- 6mm integrated knuckle design for flexible protection
- Waterproof and breathable Hipora barrier to protect hands from micro-organisms such as TB, Hepatitis, Staph and HIV
- Meets O.S.H.A. Standards for Blood-borne Pathogen Protection (29CFR 1910.1030)
- Elastic cuff and gaiter to keep out glass and debris
- Boxed finger tip design for better fit and comfort
- Cut resistant KevLoc palm, thumb panels, and side panels
- Reflective markings for increased visibility
- Sale!
OVERVIEW
The 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400 Series helps provide protection against certain airborne contaminants while keeping your vision clear with the Scotchgard™ protected lens. Scotchgard™ protection makes it possible to wipe paints, stains and other liquids off the large lens. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air systems. The 3M™ Cool Flow ™ Valve helps make breathing easier. Passive speaking diaphragm enhances communications, making it possible to be understood when talking. These features combine to make extended wear of the facepiece more comfortable and practical to use while helping to provide protection against certain airborne contaminants.
A number of additional comfort and convenience features have been built into the facepiece, including a head cradle to reduce pressure points and hair pulling, a soft silicone nose cup and faceseal to cushion heavy contact areas, bonded silicone gaskets to prevent loose gaskets from getting lost, and attachments that easily twist on and off. The facepiece fits securely with six straps that snugly wrap around the head, eliminating shifting that can distract on the job and require frequent readjustment. The straps are extremely durable, having been tested with over one million pulls. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.
- Sale!
OVERVIEW
- One-Piece, 3D, Direct-Injected Thermoplastic Rubber: adds impact protection for entire back of hand and fingers, with elevated knuckles.
- One-Piece Palm with Kevlar® Stitching: adds durability and longevity.
- TefSecure Silicone Grip Grid: adds oil, water and petro-chemical resistance, and grip control.
- Long-Cuff Design: adds protection, comfort and "tear-away" ability with heavy machinery.
- Curved Fingers: matches natural contour of hand for less hand strain.
- Easy-Pull Tabs: allows user to add name to glove, and easily pull glove on.
- Available Sizes: Small-4XL
OVERVIEW
- Flexible TPR impact protection on knuckles and fingers
- (R-314) High visibility for increased safety, Reflective markings for increased visibility
- CE rated for EN388 level 2 cut and puncture resistance
- KevLoc grip system on palm & fingers enhances grip
- Extended cuff with gaiter closure to keep out debris
- Available in either black or yellow
- Kevlar stitched palm with padding
- Sale!
OVERVIEW
Lakeland Interceptor Plus, Level A suits are gas tight and are the ultimate line of chemical protection. INT640B front entry suits are configured with gloves, boots, face shield, and heat-sealed seams. Available in sizes SM-5X, these protective suits are ideal when the maximum level of chemical protection is needed, like emergency response and HazMat operations. Available in small, medium, large, XL, 2XL, 3XL and 4XL (Sizing is based upon height and weight - please contact us for information to properly size your suit) Please note this is an updated version of prior model 80640.
