800-558-8009
800-558-8009
0
  • Sale!

    Allegro Tent Heater

    $370.00
    OVERVIEW
    The lightweight Tent Heater offers the rugged, heavy duty design of all steel housing with enclosed heating elements and a sealed motor. This powerful heater will raise the temperature 50˚ F in a work tent. It is UL listed, CSA approved, requires 110V AC, and offers 1500 watts of 5000 BTU with 115 CFM airflow.
  • OVERVIEW 
    • Build a visual fortress around temporary hazards
    • Lightweight tape can be tied, stapled or nailed to posts fences or medal barricades
    • Ideal for outdoor or indoor applications
    • 2" pressure sensitive vinyl

    Other titles available 

  • OVERVIEW
    • 28” Spring Cones are made of durable, bright orange, flexible, quick deploy mesh material and a heavy duty rubber base
    • Spring Cones weigh less and pack up in a fraction of the space of traditional highway cones
    • Spring Cones are available in 3 lb. and 5 lb. models
    • Cones are available in one cone only, 2, 4, 5 and 6 cones in an industrial tote or 10 cones in  utility storage box
    • Compact for easy storage on any truck or in vehicle trunk
    • Meets MUTCD requirements for 28” reflective highway traffic cone
  • Sale!
    OVERVIEW
    • Durable Honda generator with two telescoping lights
    • Honda EB-3000 generator with GFCI
    • Custom built hand cart with two 500 watt telescoping lights and two 500 watt portable lights with storage brackets
    • Telescopic lights extend up to 82” from the ground
    • Two front facing receptacles with weather resistant cover (specify L5-15, L5-20 or 5-15)
    • Two 25’ yellow 10/3 SO extension cords
    • Only 140# and is easily maneuverable
  • Sale!

    OVERVIEW

    • Four gas monitor (LEL / O2 / H2S / CO) with PID sensor
    • Includes pump and datalogging features
    • Powerful long life pump up to 125' range with filter
    • Autocalibration
    • Low flow pump shut off and alarm
    • Methane elimination switch for environmental use
    • Over 300 gas monitoring configurations- contact us to configure an Eagle for your specific needs
    Contact us for pricing and availability for additional configurations
  • OVERVIEW 
    • Accurately measures gasses and vapors by detection tube technology
    • This precision hand operated piston pump has a lifetime warranty
    • 100ml capacity hand pump
    • Ergonomic, durable hand pump has solid metal construction
    • Purchase the gas detection tubes here!
  • OVERVIEW
    The ppbRAE 3000 is a best-of-breed monitor trusted by many of the world’s leaders in CBRNE, HazMat Response, Civil Defense, Oil & Gas, and other hazardous environments. Using a 3rd generation photoionization detector (PID) and built-in correction factors for more than 200 compounds, the ppbRAE 3000 is one of the most advanced VOC monitors for parts-per-billion (ppb) detection. It measures the presence of VOCs from 1ppb-10,000ppm with a three-second response time. With its rugged housing, large display, and large keys that can be operated with three layers of gloves all make for a unit that’s easy to use and maintain. ppbRAE 3000  is solution oriented through multiple connected options. A dedicated mobile APP has been developed for survey applications. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter. Device Configurator Mobile APP is available on both Android and IOS
    • Measures from 1ppb up to 10,000ppb
    • 3-second response time
    • Humidity compensation
    • Sample pump draws from up to 100 feet
    • Correction factors for more than 350 compounds
    • Large display reports gas type, correction factor, concentration
    • Rugged housing for harsh environments
    • Sensor and lamp auto-cleaning
    • Multi-language capability – up to 10 languages
    • MIL-STD-810F certified rugged housing for harsh environments
    • Patented PID lamp auto-cleaning
    • Patented Reflex PID Technology™
    • Monitor available in wireless and non-wireless versions
    • Applications: CBRNE, decontamination, environmental cleanups/ remediation, hazmat response, indoor air quality, plant shutdown & turn-around, urban search & rescue, venue protection, worker exposure
    Contact us for pricing and availability for additional configurations Free Shipping
  • Sale!
    OVERVIEW
    Badger pioneered the use of wet chemical extinguishing agents and equipment technology for commercial kitchen fire protection four decades ago.  Badger's innovative design approach for a safe and effective way to address the various new Class K code requirements back in 1997 has become the industry standard for kitchen hand portable fire extinguishers. These quality fire extinguisher models are simple to use and extremely effective in handling the difficult types of cooking media fire hazard situations found in today's busy commercial kitchens. Badger Wet Chemical Hand Portable Fire Extinguisher models are ideally suited to supplement commercial cooking appliance fire suppression systems for addressing tough Class K combustible kitchen cooking media fires.
    • Heavy-duty chrome plated brass valves
    • Factory-filled 6 liter model
    • Operator safe discharge hose concept with non-metal finger guard and protective nozzle orifice seal
    • Soft 360° mist discharge stream prevents splashing
    • UL Listed—Meets D.O.T. requirements
    • Six year warranty
    • Full stainless steel cylinder, base, handle, lever and pull pin
    • Hex valve collar tightening ring for easy recharge
    • Easy-to-read two-piece nameplates
    Please note that Badger is in the process of updating their UL approval on these extinguishers - delivery will be delayed until they receive this approval (estimated to occur mid-February 2021)
  • Sale!
    OVERVIEW 
    • TPR impact protection on top of hand with full coverage for knuckles & fingers
    • Knuckle TPR design with two detached fingers for better flexibility
    • KevLoc padded palm panels & finger tips with reinforced stitching
    • Secured cuff closure with hook and loop TPR pull tab closure
    • High visibility colors for increased safety
    • Reflective finger tips and stripe for better visibility
    • Kevlar stitching
    • Available in Red or Hi Vis Yellow
  • OVERVIEW
    Whether for industrial hygiene, leak detection, or HazMat response, the MiniRAE 3000  delivers one of the most advanced VOC monitoring capabilities on the market. With a photoionization detector (PID) that has an extended detection range from 0-15,000 ppm, a rapid three-second response time, built-in correction factors for more than 200 compounds, patented auto-cleaning sensor technology and Reflex PID Technology™, the MiniRAE 3000 can measure one of the highest levels of ionizable chemicals available on the market. The powerful sample pump draws through up to 100 feet of tubing horizontally or vertically. A built-in flashlight to help navigate in darker environments and an IP 65/67 dust-tight and water-proof housing all add up to a device that performs reliably even in harsh conditions. MiniRAE 3000 is solution oriented through multiple connected options. A dedicated mobile APP has been developed for Remediation engineers and Industrial Hygienists. Instrument is also available with real time connectivity which can relay readings and alarm status up to 2 miles to a RAELink 3 wireless transmitter. Device Configurator Mobile APP is available on both Android and IOS
    • Most advanced handheld VOC monitor on the market
    • PID measures from 0-15,000 ppm
    • 3-second response
    • Humidity compensation
    • Patented PID lamp auto-cleaning technology
    • Patented Reflex PID Technology™
    • Sample pump draws from up to 100 feet
    • Correction factors for more than 200 compounds
    • IP 65/67 water-proof and dust-tight
    • Logs up to 6 months of data at 1-minute intervals
    • Multi-language capability – up to 10 languages
    • 9.8eV for benzene and TVOC and 10.6 and 11.7 UV lamps for TVOC
    • Available in wireless and non--wireless version
    • Kit includes monitor, accessory kit and calibration kit
    • Applications:emergency response, environmental cleanups/ remediation, hazmat response, leak detection, urban search & rescue, venue protection, worker exposure
    Free Shipping
  • Sale!
    OVERVIEW
    The 400 series single-stage, piston-style regulators are designed to delivery a preset flow of non-corrosive gases in the 17 liter or 34 liter non-refillable cylinders with CGA 600 inlets
    • Each regulator comes with a cylinder pressure gauge
    • Maximum inlet pressure:  500 PSIG
    • Inlet fitting:  CGA 600
    • Outlet fitting:  3/16" hose barb
    • Temperature operating range:  0-140 degrees F
  • OVERVIEW
    Hard plastic case provide a safe and convenient method for transporting and storing your  calibration cylinders. Models:
    • 500A - Holds four (4) 17 or 34 liter cylinders
    • 500B - Holds one (1) 58/103 liter cylinder and two (2) 17/34 liter cylinders
    • 500C - Holds three (3) 58/103 liter cylinders
    • 500D - Holds two (2) 17 liter or 34 liter cylinders
    • 505 - Holds two (2) 58/103 liter cylinders