OVERVIEW
OVERVIEWThe LXFB99 is the first gear bag of its’ kind designed to protect firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear until the gear can be cleaned and sanitized at the station. The bag is made with water and air tight TPU (thermoplastic polyurethane) fabric and self-healing, water resistant zippers. All seams on the main compartments of the bag are heat welded, so there are no stitches that penetrate the bag to allow air or particulates to escape (think: moisture barrier on turnout gear). Since the fabric is waterproof, the inside and outside can be cleaned and washed out with a hose to remove any remaining contaminates after the dirty turnout gear is removed and washed. The bag is designed with a main compartment to hold a full set of turnout gear including coats, pants and boots. A left-side compartment to hold a full-sized, traditional fire helmet with eagle and shield. Also a right-side compartment to hold an SCBA mask, jumpsuit, wildland gear or even a change of clothes. Finally, it has a small pocket on the front to hold personal effects such as a set of keys or a wallet. The straps, handle and shoulder carry strap are stitched with silver reflective tape for easy visibility and safety on-scene. The front of the bag includes a screen printed silver “FIRE DEPT” maltese cross logo. The entire bag is covered by a limited lifetime warranty by Lightning X Products.
OVERVIEWInterceptor® is your first line of defense against extreme chemical hazards. Interceptor® is the apex of Lakeland Industries’ chemical protective clothing line. Manufactured to both NFPA 1991 and CE Type 1 requirements and available in encapsulating and non-encapsulating configurations, there is an Interceptor® suit for your needs be it gas, vapor, aerosol, liquids, harmful contaminants or particulate protection.
OVERVIEW
Now Available
OVERVIEWDesigned by our customers, this robust and accurate gas detector provides unrivaled protection in confined space applications. The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas range. The PS500 is particularly useful in noisy environments, featuring a very loud (95dBA) penetrating and distinctive audible alarm together with high visibility large area visual alarm. Pump, diffusion or both together, allowing pumped sample for pre-entry checking and diffusion in confined space working, thus maximising battery life. A robust, moulded, rubberised casing guaranteeing Hi-Impact resistance, the PS500 can be used in the most demanding industrial environments. Please Note That Due To Territory Restrictions – This Product May Not Be Available In Your Area. Please Call For More Information & Pricing
OVERVIEW3M Scott offers multiple 40mm cartridges and canisters for wide range of protection and applications: NIOSH-APR applications: utilize HE/P100 Cartridge, MPC PLUS, or Enforcement Cartridges NIOSH-PAPR applications: utilize HE/P100 Cartridge, MPC PLUS, MPC 40PFand Enforcement Cartridges NIOSH-CBRN-APR and PAPR Applications: utilize the CBRN cap-1/Canister
OVERVIEWIn continuing the tradition of 3M Scott's dedication to our customers demanding needs, the TRC-1 (Technical Rescue Carts) Air Carts provide an uninterrupted supply of breathing air for up to eight users simultaneously. The TRC-1 Air Cart also features a unique air control switch that has the ability to utilize common or isolated air sources on the left and right outlet banks. When in isolated mode, this enables the cart to provide two separate, dedicated air sources for both a primary work team and a. rescue team.
OVERVIEWThe Monitor / Monitor Pro puts critical real-time responder SCBA information at incident commander's fingertips. Designed for use on modern, touch-enabled PCs, this easy-to-understand air management solution allows the company officer or team leader to see air, PASS and EVAC data available while establishing and maintaining command. Additional alert notification-high flow or no flow condition at full-alarm PASS-provide incident command with enhanced situational intelligence to guide critical decision making. Monitor's / Monitor Pro's automated design complements existing accountability and incident command SOGs without the burden of additional work.
OVERVIEWThe SEMS II and SEMS II Pro enable vital communication between responders and Incident Command. Leveraging a patented mesh-based network, SEMS II provides a robust connection in commercial and residential structures alike. SCBA telemetry is transmitted to the base station and can be displayed in the Scott Connect Monitor for Windows application giving the incident commander an enhanced view of the fire ground.
OVERVIEWUpgrade legacy model Air-Pak SCBA to the most current edition of the NFPA 1981 and 1982 standards with the new Air-Pak SCBA NFPA 2013 Compliant Upgrade Kit. The kit provides a lower-cost alternative to purchasing new SCBA, allowing fire department to maximize the service life of existing equipment (i.e. cylinders) without the burden of a full fleet replacement. A 10-year warranty provides peace of mind, knowing that out-of-pocket maintenance cost are kept to a minimum. The warranty applies to all the components that are replaced as part of the upgrade kit. Customers can also choose to take advantage of innovative technology enhancements, including the Pak-Tracker Firefighter Location System or SEMS II Air Management System with Monitor Telemetry Software Solution. Upgrading the operation pressure of the Air-Pak SCBA to 5500 psig is also an option, allowing customers to realize the maximum benefits from this Scott Safety "industry first." Upgrade kits are offered for both NFPA 1981, 2002 edition and the NFPA 1981, 2007 edition Air-Pak SCBA. Please note due to territory restrictions - this product is only available for delivery to Minnesota, portions of Iowa, North Dakota and Wisconsin.
OVERVIEWThe UNI 321 is a disposable or maintenance-free version of the UNI single gas detector. It detects hydrogen sulfide (H2S), carbon monoxide (CO) or oxygen (O2) in your selection of models with operating lives of 12 months (MP101), 24 months (MP102) or 36 months (MP103). The detectors have a large LCD providing maximum readability in the field. Six bright red LEDs allow for quick alarm notification. Constructed of strong and durable material, the UNI 321 is designed to be comfortable yet drop-resistant. The UNI 321 detectors can easily be bump tested and calibrated with the CaliCase System.
OVERVIEWThe UNI MP100 offers a simple, personal protection solution for a wide array of toxic gas and oxygen (O2) measurement applications. In addition to common sensors such as carbon monoxide (CO), hydrogen sulfide (H2S), nitrogen dioxide (NO2), ammonia (NH3) and sulfur dioxide (SO2), we offer less-common sensors including chlorine (CI2), chlorine dioxide (CIO2) hydrogen chloride (HCI), phosphine (PH3) , ozone (O3), methyl mercaptan and ethylene oxide. The monitors have a large LCD providing maximum readability in the field and are made with six bright red LEDs allowing for a quick alarm notification. Constructed of strong and durable material, the UNI is designed to be comfortable yet drop-resistant. The UNI series can easily be bump tested and calibrated with the mPower CaliCase System (not included).